Table of Contents
Advertisement
Digital Video Recorder
Spot Monitoring
You can select the camera you want to display on a Spot Monitor. Press the
button on the
SPOT
front panel or remote control, and select one of four Spot Monitors. Then, select the camera to
be displayed on the Spot Monitor.
Figure 103 — Spot Monitor menu.
If you want to display more than one camera on a Spot Monitor, you can display them
sequentially. In the Spot Monitor selection mode, press the
button on the front
SEQUENCE
panel or remote control, or select Sequence On from the menu to start displaying cameras
button or select Sequence On again to stop sequencing
sequentially. Press the
SEQUENCE
on the Spot Monitor. Any cameras that are Off, have lost video or are set to Covert (unless the
user has authority to view covert cameras) will be excluded from the sequence.
Figure 104 — Sequence menu.
The Spot Monitor 1 supports multi-view formats and displays live video using the same settings
as the main monitor. (PRO Model only)
When the Spot Monitor is in the sequence mode, you can set the camera's display dwell time.
Refer to Chapter 3 – Configuration – Display Screen section for details.
81
Hide quick links:
Advertisement
Table of Contents
