Figure 35 - Storage Status Screen - PACOM PDR-9LX User Manual

If you want to use a USB hard disk drive, highlight Use and press the
connecting the device. Highlight Don't Use and press the
the device.
NOTE: When disconnecting a USB hard disk drive from the DVR, highlight Don't Use
first and then disconnect the device.
CAUTION: Do NOT disconnect the USB cable or the power from the device while
copying video clips. If the USB cable is disconnected while copying video clips,
archived data might be lost.
Highlight the Status tab, and the Storage Status screen displays.
The Type column displays the type of storage device.
The Disk Bad column displays the percentage of bad sectors. Not Formatted indicates the
device is not formatted.
The Temperature column displays the temperature of the storage device.
The S.M.A.R.T. column displays "Good", "Bad" or "N/A", depending on storage conditions.
Good — The storage condition is normal.
Bad — Data cannot be written on or read from the storage device.
N/A — Storage conditions are normal, however, the S.M.A.R.T. monitoring is not
working or supported
Figure 35 — Storage Status screen.
Digital Video Recorder
button after
button if you want to stop using
25