Figure 81 - Motion Detection Zone Menu; Figure 82 - Daytime Setup Screen - PACOM PDR-9LX User Manual

User's Manual
Select — Activates highlighted blocks to detect motion.
Clear — Deactivates highlighted blocks so that they will not detect motion.
Reverse — Activates inactive highlighted blocks and deactivates active highlighted blocks.
Select All — Activates all blocks to detect motion.
Clear All — Deactivates all blocks so that they will not detect motion.
Reverse All — Activates inactive blocks and deactivates active blocks.
OK — Accepts changes and closes Zone setup.
Cancel — Exits Zone setup without saving changes.
You can control excessive event logging and remote notification of motions detected after the
motion dwell time by adjusting the motion ignoring dwell intervals. Highlight the box beside
Motion Ignoring Interval and press the
seconds or Never appears. The DVR will not log and notify motion events occurred during the
preset interval range.
NOTE: The record action for motion events will not be affected by the Motion Ignoring
function.
Highlighting the box beside Daytime Setup and pressing the
Daytime range.
Highlight the box beside Daytime and press the
buttons to set the Daytime range. The DVR will consider the remaining time range as the
Nighttime.
Highlight the Actions 1 and Actions 2 tabs and the Motion Detection Actions 1 and Actions 2
screens display.
60
Figure 81 — Motion Detection Zone menu.
Figure 82 — Daytime Setup screen.
button. A list of intervals ranging from 1 to 10
button. Use the Up and Down arrow
button allow you to set up the