AAM1212 User's Guide
This command displays which alarm profiles the AAM is set to use for specific (or all) ADSL
ports.
The following example displays which alarm profile the AAM is set to use for ADSL port 5.
Figure 122 Alarm Profile Showmap Command Example
ras> adsl alarmprofile showmap 5
ADSL alarm profile mapping:
Port
5: Alarm Profile = DEFVAL
27.4 Virtual Channel Profile Commands
Use the following commands to configure virtual channel profiles.
27.4.1 Show Virtual Channel Profile Command
Syntax:
adsl vcprofile show [vcprofile]
where
[vcprofile]
Displays the settings of the specified virtual channel profile (or all of them if you do not
specify one).
27.4.2 Set Virtual Channel Profile Command
Syntax:
adsl vcprofile set <vcprofile> <vc|llc> <ubr|cbr> <pcr> <cdvt>
or
adsl vcprofile set <vcprofile> <vc|llc> <vbr(rt-vbr)|nrt-vbr> <pcr> <cdvt>
<scr> <bt>
210
=
The name of the virtual channel profile (up to 31 ASCII
characters).
Chapter 27 ADSL Commands