ZyXEL Communications AAM1212 User Manual page 219

AAM1212 User's Guide
Table 61 Switch Commands (continued)
COMMAND
pktfilter
dot1x
218
disable
<portlist>
set <port>
<mac> [<mac>
<mac> ...]
delete <port>
<mac> [<mac>
<mac> ...]
show [portlist]
set <portlist>
[pppoe|ip|arp|n
etbios|dhcp|eap
ol|igmp|none]
pppoeonly <portlist>
show [portlist]
enable
disable
auth <profile|radius
>
port
enable
<portlist>
disable
<portlist>
control
<portlist>
<auto|auth|unau
th>
reauth
<portlist>
<on|off>
period
<portlist>
<period>
DESCRIPTION
Turns off the MAC filter for a port(s).
Adds a MAC filter MAC entry.
Removes a MAC filter MAC entry.
See Section 28.13 on page 240
how to configure packet filters.
Displays packet type filter settings.
Sets the packet type filter for a specific
port.
none accepts all packets. This
pktfilter
command disables the
pppoeonly <portlist>
command.
Uses this command to allow only
PPPoE traffic. It drops any non-
PPPoE packets.
This command disables the
pktfilter set <portlist>
[pppoe|ip|arp|netbios|dhc
p|eapol|igmp|none]
Displays IEEE 802.1X settings.
Turns on IEEE 802.1X.
Turns off IEEE 802.1X.
Sets IEEE 802.1X to use the local
profiles or an external RADIUS server
for authentication.
Turns on IEEE 802.1X for specific
ports.
Turns off IEEE 802.1X for specific
ports.
Sets the IEEE 802.1X port
authentication option for specific ports.
Sets the IEEE 802.1X re-
authentication option for specific ports.
Sets the IEEE 802.1X re-
authentication period for specific ports.
Chapter 28 Switch Commands
for
command.