Table of Contents
Advertisement
Figure 57 VLAN Port Setting
The following table describes the labels in this screen.
Table 28 VLAN Port Setting
LABEL
VLAN Status
Static VLAN
Setting
Port
PVID
Priority
GVRP
Acceptable Frame
Type
Apply
Chapter 9 VLAN
DESCRIPTION
Click VLAN Status to see which of the AAM's ports are members of which VLANs.
Click Static VLAN Setting to configure ports to dynamically join a VLAN group or
permanently assign ports to a VLAN group or prohibit ports from joining a VLAN
group.
The port numbers identify the AAM's ports.
Type the Port VLAN ID (PVID) from 1 to 4094. The AAM assigns the PVID to
untagged frames or priority frames (0 VID) received on this port.
Select an IEEE 802.1p priority to assign to untagged frames or priority frames (0
VID) received on this port. See
priority levels.
GVRP (GARP VLAN Registration Protocol) is a registration protocol that defines a
way for switches to register necessary VLAN members on ports across the
network. The AAM propagates VLAN information to other devices when this check
a
box is selected.
Select All to have the port accept both tagged and untagged incoming frames.
Select Tag Only to have the port only accept incoming frames that have a VLAN
tag.
Select Untag Only to have the port only accept incoming frames that do not have a
b
VLAN tag.
Click Apply to save your changes to the AAM's volatile memory. The AAM loses
these changes if it is turned off or loses power, so use the Config Save link on the
navigation panel to save your changes to the non-volatile memory when you are
done configuring.
AAM1212 User's Guide
Table 11 on page 78
for more information on the
117
Advertisement
Table of Contents
Troubleshooting
