Viewing The Mac Table; Figure 88 Mac Table; Table 56 Mac Table - ZyXEL Communications AAM1212 User Manual

AAM1212 User's Guide

23.2 Viewing the MAC Table

Click Management in the navigation panel and then MAC Table to display the following
screen.

Figure 88 MAC Table

The following table describes the labels in this screen.

Table 56 MAC Table

LABEL
Get Time
Page X of X
Previous/Next
Show
Index
MAC
Port
VID
VPI/VCI
Refresh
Flush
164
DESCRIPTION
This displays the date and time that the displayed MAC address information was last
updated. The date is in year, month and day format. The time is in (24-hour) hour,
minute and second format.
This identifies which page of information is displayed and the total number of pages of
information.
Click one of these buttons to show the previous/next screen if all of the information
cannot be seen in one screen.
Select an individual port for which to show information.
This is the number of the MAC table entry.
This is the MAC address of the device that the AAM has learned is connected to the
port.
This is the port to which the MAC address is associated.
This is the VLAN group to which the device belongs.
This field displays the Virtual Path Identifier and Virtual Circuit Identifier of the channel
(PVC) to which the device is connected (for devices connected to DSL ports).
Click Refresh to update the list of dynamically learned MAC addresses.
Click Flush to remove all of the dynamically learned MAC address entries from the
MAC table.
Chapter 23 MAC Table