Figure 22 Basic Setting Ip Setup Menu; Figure 23 Ip Setup - ZyXEL Communications AAM1212 User Manual

AAM1212 User's Guide

Figure 22 Basic Setting IP Setup Menu

5 Use this screen to change the IP address, subnet mask, and default gateway IP address for
your network. Apply the settings. If you change the AAM's IP address, you must use the
new IP address if you want to access the web configurator again.

Figure 23 IP setup

6 Skip to step
the ADSL ports). Otherwise, use the following steps to change the VPI and VCI settings
for all of the ADSL ports.
First you will delete the default virtual channel from all of the ADSL ports (you cannot
edit it).
Adding another virtual channel without deleting the default virtual channel is not
recommended since you cannot set the new channel to be the port's super channel. The
super channel can forward frames belonging to multiple VLAN groups (that are not
assigned to other channels). A channel that is not the super channel can only forward
frames with a single VLAN ID (that is configured on that channel). The AAM would
drop any frames received from the subscriber that are tagged with another VLAN ID.
Then you will configure a new virtual channel for a port and copy it to the other ADSL
ports
7 Under Basic Setting, click xDSL Port Setup.
56
15 if you have your subscribers use VPI 0 and VCI 33 (the default for all of
Chapter 5 Initial Configuration