This chapter describes some of the ADSL commands that allow you to configure and monitor
the ADSL ports.
27.1 ADSL Standards Overview
See the web configurator chapter on ADSL for background information. Refer to
on page 60
27.2 ADSL Commands Summary
The following table lists the
Table 60 ADSL Commands
COMMAND
adsl
show
enable
disable
profile
Chapter 27 ADSL Commands
for the settings of the default profile and ADSL port default settings.
adsl
[portlist]
<portlist>
<portlist>
show
set
C
H A P T E R
ADSL Commands
commands you can use with the AAM.
DESCRIPTION
Displays the ADSL settings.
Turns on the specified ADSL ports.
Turns off the specified ADSL ports.
Displays profile contents.
[profile]
Creates an ADSL profile.
<profile>
<fast|
interleave
[=<up
delay>,<down
delay>]> <up
max rate> <down
max rate> [<up
target margin>
<up min margin>
<up max margin>
<up min rate>
<down target
margin> <down
min margin>
<down max
margin> <down
min rate>]
AAM1212 User's Guide
2 7
Section 5.3
195