Alarm Profile Set Command; Figure 118 Alarm Profile Show Command Example - ZyXEL Communications AAM1212 User Manual

The following example displays the default alarm profile (DEFVAL).

Figure 118 Alarm Profile Show Command Example

ras> adsl alarmprofile show DEFVAL
01. DEFVAL
Thresh15MinLofs
Thresh15MinLoss
Thresh15MinLols
Thresh15MinLprs
Thresh15MinESs
ThreshFastRateUp
ThreshInterleaveRateUp
ThreshFastRateDown
ThreshInterleaveRateDown
InitFailureTrap(1-enable, 2-disable):
Thresh15MinFailedFastRetrain
Thresh15MinSes
Thresh15MinUas

27.3.15 Alarm Profile Set Command

Syntax:
adsl alarmprofile set <profile> [<atuc lofs> <atur lofs> <atuc loss> <atur
loss> <atuc lols> <atuc lprs> <atur lprs> <atuc ess> <atur ess> <atuc fast
rateup> <atur fast rateup> <atuc interleave rateup> <atur interleave
rateup> <atuc fast ratedown> <atur fast ratedown> <atuc interleave
ratedown> <atur interleave ratedown> <init fail enable> <atuc ses> <atur
ses> <atuc uas> <atur uas>]
where
<profile>
atuc
atur
<atuc lofs>
<atur lofs>
<atuc loss>
<atur loss>
<atuc lols>
<atuc lprs>
<atur lprs>
Chapter 27 ADSL Commands
(sec):
(sec):
(sec):
(sec):
(sec):
(bps):
(bps):
(bps):
(bps):
:
(sec):
(sec):
= A name for the alarm profile (up to 31 ASCII characters).
Upstream. These parameters are for the connection (or traffic)
coming from the subscriber's device to the AAM.
Downstream. These parameters are for the connection (or
traffic) going from the AAM to the subscriber's device.
= The number of Loss Of Frame Seconds that are permitted to
occur within 15 minutes.
= The number of Loss Of Signal Seconds that are permitted to
occur within 15 minutes.
= The number of Loss Of Link Seconds that are permitted to
occur within 15 minutes.
= The Number of times a Loss of PoweR is permitted to occur (on
the ATUR) within 15 minutes.
AAM1212 User's Guide
ATU-C ATU-R
---------- ----------
0
0
0 ---
0
0
0
0
0
0
2 ---
0 ---
0
0
0
0
0
0
0
0
0
0
0
0
207