ZyXEL Communications AAM1212 User Manual page 202

<down max rate>
<up target
margin>
<up min margin>
<up max margin>
<up min rate>
<down target
margin>
<down min
margin>
<down max
margin>
<down min rate>
The profile is a table that contains information on ADSL line configuration. Each entry in this
table reflects a parameter defined by a manager, which can be used to configure the ADSL
line.
Note that the default value will be used for any of the above fields that are omitted.
The upstream rate must be less than or equal to the downstream rate.
Even though you can specify arbitrary numbers in the profile set command, the actual rate is
always a multiple of 32 Kbps. If you enter a rate that is not a multiple of 32 Kbps, the actual
rate will be the next lower multiple of 32Kbps. For instance, if you specify 60 Kbps for a port,
the actual rate for that port will not exceed 32 Kbps, and if you specify 66 Kbps, the actual rate
will not be over 64Kbps.
The following example creates a premium profile (named gold) for providing subscribers with
very high connection speeds and no interleave delay. It also sets the upstream target signal/
noise margin to 5 db, the upstream minimum acceptable signal/noise margin to 0 db, the
upstream maximum acceptable signal/noise margin to 30 db, the upstream minimum ADSL
transmission rate to 64 Kbps, the downstream target signal/noise margin to 5 db, the
downstream minimum acceptable signal/noise margin to 0 db, the downstream maximum
acceptable signal/noise margin to 30 db and the downstream minimum ADSL transmission
rate to 128 Kbps.
ras> adsl profile set gold fast 800 8000 5 0 30 64 5 0 30 128
Chapter 27 ADSL Commands
=
The maximum ADSL downstream transmission rate (32-
25000 Kbps).
=
The target ADSL upstream signal/noise margin (0-31db).
=
The minimum acceptable ADSL upstream signal/noise margin
(0-31db).
=
The maximum acceptable ADSL upstream signal/noise margin
(0-31db).
=
The minimum ADSL upstream transmission rate (32-3000
Kbps).
=
The target ADSL downstream signal/noise margin (0-31db).
=
The minimum acceptable ADSL downstream signal/noise
margin (0-31db).
=
The maximum acceptable ADSL downstream signal/noise
margin (0-31db).
=
The minimum ADSL downstream transmission rate (32-25000
Kbps).
AAM1212 User's Guide
201