Firmware File Upgrade - ZyXEL Communications AAM1212 User Manual

AAM1212 User's Guide
Enter the User name (just press [ENTER]).
[ENTER]
User:
Enter the management password (1234 by default).
Password: 1234
230 Logged in
ftp> put xxx.dat config-0
Quit FTP.
ftp> quit
Wait for the update to finish. The system restarts automatically.

32.4 Firmware File Upgrade

Use the following procedure to upload firmware to the AAM.
Use an FTP client to connect to the AAM.
C:\> ftp <AAM IP address>
Enter the User name (just press [ENTER]).
[ENTER]
User:
Enter the management password (1234 by default).
Password: 1234
230 Logged in
Transfer the firmware file to the AAM. The firmware file on your computer (that you want to
put onto the AAM) is named firmware.bin. The internal firmware file on the AAM is named
.
ras
ftp> put firmware.bin ras
Quit FTP.
ftp> quit
Wait for the update to finish. The AAM restarts automatically.
266 Chapter 32 Firmware and Configuration File Maintenance