Scan Engine Settings - CipherLab CP60 Reference Manual

SCAN ENGINE SETTINGS

The CipherLab developed utility Reader Configuration configures the following reader
types:
1D Laser (SE955)
1D Long Range Laser (SE965HP)
2D Imager (SE4500DL)
HF RFID Reader
For mobile computers with an HF RFID reader integrated, the reader combination allowed is
either 1D plus RFID or 2D plus RFID. All readers are triggered by the scan key, meaning that
when you press the physical scan key, the mobile computer reads a printed barcode or an
RFID tag in position, depending on which reader is enabled at that time.
Note:
(1) 1D and 2D scan engines don't coexist on the mobile computer because they are both
barcode readers and the mobile computer allows one barcode reader only.
(2) Run only one reader-controlling utility or application at a time. For example, while
running Reader Configuration, avoid running MIRROR Browser, Terminal Emulation,
or any other application that uses ReaderDLL.
IN THIS CHAPTER
Symbologies Supported...................................................256
RFID Tags Supported ......................................................258
Appendix I
255