Page 1 Windows Embedded Handheld 6.5 CP50/CP50 G Version 1.07 UNGLAUBE GmbH An der Moosach 3a D-85376 Massenhausen Tel: +49 8165 9558-0 kontakt@unglaube.de www.unglaube.de...
Page 2: Disclaimer
The information contained in this document, including all pictures, illustrations and software, is the proprietary information of CIPHERLAB CO., LTD. and its respective legal owners; it is protected by copyright laws and international copyright treaties, as well as other intellectual property laws and treaties, with all rights reserved.
Page 3: Safety Notices
SAFETY NOTICES FOR HAND-HELD PRODUCT WITH RF FUNCTIONS CP50/CP50 G serial handheld equipment uses wireless radios that have been designed and manufactured to meet safety requirements for limiting exposure to radio waves. When used in accordance with the instructions set forth in this manual, the equipment has been independently verified to not exceed the emission limits for safe exposure to radio frequency (RF) energy as specified by EN50360 of EEC.
Page 4: Safety Precautions
DISPOSE OF USED BATTERIES ACCORDING TO THE INSTRUCTIONS. The use of any batteries or charging devices, which are not originally sold or manufactured by CipherLab, will void your warranty and may cause damage to human body or the product itself.
Page 5: Declaration Of Conformity
TEL : +49 2161 56230 http://www.cipherlab.com http://www.cipherlab.de Type of Equipment Mobile Computer Model(s) Declared CP50, CP50 G Initial Year of Manufacture 2012 Reference to the specification under which conformity is declared in accordance with Directive- 2004/108/EC, 95/5/EC EN 300 328 V1.7.1:2006 EN 300 440-1 V1.6.1:2010...
Page 6: Release Notes
RELEASE NOTES Version Date Notes Update: Declaration of Conformity 1.07 Nov 2012 Add: 1.4.3 Warning for low battery level, 7.1.2 Warning for update registry backup file Revise: 7.1.2 Perform registry backup to show registry files under 7.2.2 Browse during button system backup, “All Folders”...
Page 7 8.2.1 Connections Folder: Add Mode tabbed page 8.2.3 System Folder: Update Device ID format 8.2.3 System Folder: Revise Device Config description, 3 digit 8.2.3 System Folder: Revise Wi-Fi module list, add 8 code, and remove reserved items in Device ID Digit Pair table Appendix II: Add Code 128 option, add EAN/UPC security level Appendix II, III: Add description for Enable Addons Appendix III: Add description for Transmit US Postal Check Digit...
Page 8: Table Of Contents
CP50 Mobile Computer Reference Manual CONTENTS PREFACE ....................- 2 - Copyright.................... - 2 - Disclaimer................... - 2 - Trademark Recognition ................- 2 - Contact ....................- 2 - Safety Notices..................- 3 - For Hand-held Product with RF Functions ..........- 3 - For Product with Laser ................
Page 9 CP50 Mobile Computer Reference Manual 1.7.3. Insert SD Card ..............39 1.8. Direct Data Connection ............40 1.8.1. Use Cable................40 1.8.2. Use Cradle................41 1.8.3. Syncing Tools ............... 42 1.8.4. Sync Partnership ..............42 1.8.5. USB Sync ................. 43 1.8.6.
Page 10 CP50 Mobile Computer Reference Manual 4.4. Suspend & Reset Mobile Computer..........101 4.4.1. Suspend Mobile Computer ............101 4.4.2. Wake up Mobile Computer............102 4.4.3. Reset Mobile Computer ............102 4.5. Set Screen Lock ..............104 4.5.1. Unlock Screen ..............104 4.6. Work with Menus ..............105 4.6.1.
Page 11 CP50 Mobile Computer Reference Manual 5.4.4. Edit a VPN ................145 5.4.5. Delete a VPN...............145 5.5. Install Secure Certificates ............147 5.5.1. Supported Certificate Formats ..........147 5.5.2. View Secure Certificates............147 5.5.3. Install secure Certificates ............147 5.6. Location Discovery..............149 5.6.1. Launch GPS & AGPS...............149 5.6.2.
Page 12 CP50 Mobile Computer Reference Manual 6.11. Make An Emergency Call ............185 MORE APPLICATIONS................. 187 7.1. Backup Utility ..............188 7.1.1. Launch Backup Utility ............188 7.1.2. Registry Backup and Restoration ..........189 7.1.3. System Files Backup ..............191 7.1.4. System Files Restoration............194 7.2. Button Assignment ..............196 7.2.1.
Page 13 CP50 Mobile Computer Reference Manual 2D IMAGER (SE4500DL)................245 Symbology Settings .................245 1D Symbologies ..................245 2D Symbologies ..................251 Miscellaneous ..................253 HF RFID READER ..................255 RFID Tag Default Block ................255 PHYSICAL KEYPAD REFERENCE TABLE ............257 Numeric Keypad ..................257 Use Alpha (α), Shift ( ) & Fn Keys ............257 QWERTY Keypad ..................259...
Page 14: Introduction
RFID reader. A high performance 5 mega-pixel camera also comes inside to take pictures and shoot videos to deliver better documentation for users. Rated with IP65, the rugged CP50 is light-weighted and easy to cradle in your hand, and will serve as your sturdy companion in the field.
Page 15: Features
Total data solution — supporting Bluetooth, 802.11b/g and HSPA+ Security Access Module for payment-related applications Built-in GPS receiver to deliver location discovery A-GPS and E911 (CP50 G only) 5 mega-pixel camera for taking pictures and shooting videos. C++ and .Net programming support INSIDE THE PACKAGE The mobile computer ships with the following items.
Page 16: Use Mobile Computer
Chapter 1 USE MOBILE COMPUTER Before the mobile computer takes part in your work, get to know it first. This chapter introduces the basic features of the mobile computer including the power supply, memory, and the units that bridge users with the mobile computer. This chapter helps you set the mobile computer to work in a minimal amount of time.
Page 17: Take A Tour
CP50 Mobile Computer Reference Manual 1.1. TAKE A TOUR This section shows the major components on the mobile computer and inside battery chamber. You will also learn how to power on/off the mobile computer and how the mobile computer gives information about its status.
Page 18: Inside Battery Chamber
Chapter 1 Use Mobile Computer 1.1.2. INSIDE BATTERY CHAMBER Inside battery chamber are the sockets for SIM card, SAM card and storage card. Each is equipped with a hinged cover. Figure 2: Inside Battery Chamber...
Page 19: Power On/Off
CP50 Mobile Computer Reference Manual 1.2. POWER ON/OFF To power on/off the mobile computer, press and hold the Power button sitting above the upper-left of touchscreen. When powering off, the O.S. shows a screen that prompts to keep holding the Power button until the mobile computer turns off.
Page 20: Notifications
To control sound volume, see Volume Control. The speaker also sounds for good barcode reading, which can be enabled/disabled by CipherLab’s ReaderConfigMobile.exe. See Notifications for setting. VIBRATOR The mobile computer owes its tactile feedback to the vibrator built inside. Vibration delivered to the mobile computer alerts users of its current status.
Page 21 Reference Manual Same as the speaker and LED light, the vibrator works for good barcode reading. CipherLab’s utility ReaderConfigMobile.exe enables users to turn the vibration on/off and decides the duration. See Notifications. The vibrator is also programmable. See the API library that is provided for your reference.
Page 22: Battery
Chapter 1 Use Mobile Computer 1.4. BATTERY The mobile computer is fed by two batteries, main battery pack and backup battery. Main battery is removable and replaceable from battery chamber while backup battery is mounted on the main board inside the mobile computer. When the mobile computer ships, main battery isn’t installed but stored in a separate package, which keeps it in good condition for future use.
Page 23 CP50 Mobile Computer Reference Manual To install main battery pack, follow through the steps below by referencing to the illustration: Figure 4: Main Battery Setup...
Page 24: Charge Batteries
Chapter 1 Use Mobile Computer 1) Remove hand strap. 2) Push battery lock to unlock position. 3) Push back battery release, which is spring-loaded. Battery door opens automatically. Detach battery door to reveal battery chamber. 4) Insert the main battery pack into the battery chamber by meeting its edge connectors with the contact pins inside the chamber.
Page 25 CP50 Mobile Computer Reference Manual DIRECT CHARGING USING CABLE Direct charging the mobile computer relies on the USB Charging & Communication Cable (hereinafter “USB cable”) included in the package. There is a power jack on the connector of this USB cable to tap external power.
Page 26 Chapter 1 Use Mobile Computer DIRECT CHARGING USING CRADLE Direct cradle charging makes use of a Charging & Communication Cradle (hereinafter “cradle”). The cradle is one of the accessories you can opt for. Prior to charging, install main battery as described in Main Battery Setup.
Page 27: Monitor Battery Level
CP50 Mobile Computer Reference Manual 1.4.3. MONITOR BATTERY LEVEL Main battery is the only source that feeds the mobile computer to work. It also supplies the backup battery on main board to hold the data stored in DRAM. Hence when main battery gets low, recharge it or change it as soon as possible.
Page 28 Chapter 1 Use Mobile Computer Main battery isn’t being charged. Main battery is being charged. Power amount delivered in percentage The horizontal graphic bar shows coarse enables more accuracy. power amount. LOW BATTERY ALERTS When main battery level drops below 40% , the mobile computer prompts “Main Battery Low”...
Page 29 CP50 Mobile Computer Reference Manual Warning: Constant usage of the mobile computer at low battery level can affect battery life. For maximum performance, recharge the battery periodically to avoid battery drain out and maintain good battery health. Once battery level drops under 6% (no more than 5.9%), the mobile computer enters suspension and cannot be awoken unless battery level exceeds 6%.
Page 30: Power Management
Chapter 1 Use Mobile Computer LOW BATTERY ALERT When backup battery drops low, the mobile computer prompts for recharge with a dialog. Title Bar shows an icon. Backup battery is rechargeable by external power (through power adapter) or main battery pack.
Page 31: Optimize Battery Life
CP50 Mobile Computer Reference Manual 1.4.5. OPTIMIZE BATTERY LIFE Power issues are critical for portable devices. Always turn off the features you don’t need on the mobile computer to save power. To extend battery life as long as possible, always take the following actions: Suspend the mobile computer when it isn’t actively used.
Page 32: Text Input
1.5. TEXT INPUT The mobile computer has a physical keypad and a touchscreen to receive user’s input. Among the two, the touchscreen provides more intuitiveness than the physical keypad can offer to interact with the device. This section shows how to input text using physical keypad and onscreen keyboard. To know how to touch-control the mobile computer, see Touch Control.
Page 33 CP50 Mobile Computer Reference Manual Key Group Description “Action keys” include the Scan key and Backlight key. They deliver the functions ACTION KEYS described below: Press Reads barcodes and RFID tags. Scan Key Turns on/off screen/keypad backlight. Backlight Key The following tabulates O.S. keys and their functions. Some of them are engraved O.S.
Page 34 Chapter 1 Use Mobile Computer Physical keypad enters numbers and symbols. For details about shift key, see numeric keypad’s Shift and QWERTY keypad’s Shift key NUMERIC KEYPAD CHARACTER KEYS Numeric keypad wedges a set of character keys at the lower half. They are laid out analogously to a telephone keypad plus all the key, backspace , and shift key...
Page 35 CP50 Mobile Computer Reference Manual Keypad enters numbers 0 This state doesn’t quit unless through 9 (and symbols * key or shift key is pressed. and #). Keypad enters the first typed This state quits once a character is key as a symbol.
Page 36 Chapter 1 Use Mobile Computer QWERTY KEYPAD CHARACTER KEYS QWERTY keypad also arranges its character keys in the lower half and features them in a compact “QWERTY” layout as its name suggests. QWERTY keypad is a pared down version of an average laptop’s keyboard that bears each key in addition to , backspace , and shift keys...
Page 37 CP50 Mobile Computer Reference Manual Keypad enters numbers This state doesn’t quit unless symbols. is pressed. OTHER KEYS Descrption Executes a command or confirms input. When text input, it inserts a break between paragraphs. Backspace Erases the characters to the left of caret.
Page 38: Onscreen Keyboard
Chapter 1 Use Mobile Computer 1.5.2. ONSCREEN KEYBOARD The O.S. provides users with an onscreen keyboard. Compared to physical keypads, the onscreen keyboard bears more likeness to a conventional laptop’s keyboard by all the modifiers keys arranged on the left edge and the “QWERTY” layout. The onscreen keyboard isn’t overshadowed by physical keypads at all but outdoing them by being able to enter a series of diacritics for European languages.
Page 39 CP50 Mobile Computer Reference Manual Modifier keys are illustrated as follows: Description Ctrl key Once tapped, it becomes color-inverted and causes a special action from O.S. or the active application when a character key is tapped. It quits once said action is triggered or when it is tapped again.
Page 40 Chapter 1 Use Mobile Computer Input Once tapped, it becomes color-inverted and presents a series of accented vowels modifier such as ä, æ, ë, ï, ö, ú or letter variants such as ß and ç which are needed for European languages.
Page 41 CP50 Mobile Computer Reference Manual Lowercase Uppercase OTHER KEYS Description Tab key Navigates among the highlight items in some applications. For text input, it inserts Tab character, which means it moves caret to the next tab stop. Backspace Erases the characters to the left of caret.
Page 42 Chapter 1 Use Mobile Computer A list of suggested words briefly display over the keyboard A word previously added to dictionary and became suggestible Dictionary’s inherent suggestions “L” is entered. CHANGE KEYBOARD ORIENTATION The mobile computer is built-in with a G-sensor and supports screen orientation, which is enabled by default.
Page 43: Handwriting Recognition
CP50 Mobile Computer Reference Manual 1.5.3. HANDWRITING RECOGNITION Onscreen text input doesn’t necessarily rely on onscreen keyboard. “Handwriting Recognition” can also get the job done. “Handwriting Recognition” is an input method that interprets and converts user’s handwriting received through touchscreen to text.
Page 44 Chapter 1 Use Mobile Computer BLOCK RECOGNIZER Also known as “Graffiti”, a writing system used on Palm O.S.-based PDAs. It recognizes handwriting by the particular “neography” that relies on user drawing an uppercase letter with a single stroke. The name comes from the feature of its drawing area divided to two blocks to admit each letters-drawing and numbers-drawing.
Page 45: Edit Text
CP50 Mobile Computer Reference Manual LETTER RECOGNIZER “Letter Recognizer” presents a writing pad divided in three areas. Each respectively detects uppercase letters, lowercase letters, and numbers/symbols/punctuations. To enter text: Write letters, numbers, and numbers/symbols in their respective areas as desired. Letter Recognizer then converts them to typed text.
Page 46 Chapter 1 Use Mobile Computer SELECT TEXT When you see some text on a page you want to copy, select it first. Selecting texts varies from application to application. But primarily it takes you to tap & hold somewhere on the text to open a context menu or open the applications’...
Page 47: Touch Control
CP50 Mobile Computer Reference Manual 1.6. TOUCH CONTROL The mobile computer’s LCD is overlaid by a resistive touch panel and thus forms a resistive touchscreen. Since a resistive touchscreen locates the user’s touch by the force applied on it, by operating with the stylus one can apply minimum force to trigger actions from the touchscreen.
Page 48: Calibration
Chapter 1 Use Mobile Computer 2) Tap Settings | System | Backlight Backlight settings open. 3) Select between Battery Power and External Power tabbed pages. 4) Select Manual brightness control and manually adjust the brightness level, or deselect Manual brightness control and leave the brightness on automatic. Backlight’s Battery Power tabbed page 1.6.4.
Page 49 CP50 Mobile Computer Reference Manual 3) Tap Align Screen button. Screen alignment application opens. 4) Accurately tap on the centers of each cross mark to show consecutively onscreen, 5 in total. 5) Follow through the calibration.
Page 50: Memory
Chapter 1 Use Mobile Computer 1.7. MEMORY The mobile computer packs the following memory units to retain data and instructions from users: Random-access Memory (RAM) 256 MB SDRAM for temporary storage and fast access of active applications. SDRAM is fed by backup battery to hold data. Internal Storage 2GB flash memory to store O.S.
Page 51 CP50 Mobile Computer Reference Manual INTERNAL STORAGE On Start screen, tap Settings | System | Memory . Memory screen opens showing Main tabbed page. This page gives the information about the mobile computer’s use of RAM and internal storage. Main tabbed page delivers two labels – Storage and Program: Storage - Internal memory for files storage, such as O.S., applications and the files...
Page 52: Insert Sd Card
Chapter 1 Use Mobile Computer 1.7.3. INSERT SD CARD By your day-to-day use of the mobile computer, available internal storage may run short. Equip the mobile computer with an external memory unit to expand storage capacity. Follow through the steps below to install a SD card: 1) Power off the mobile computer.
Page 53: Direct Data Connection
CP50 Mobile Computer Reference Manual 1.8. DIRECT DATA CONNECTION “Direct” data connection means “hardwired” data connection between the mobile computer and a Windows-based PC as opposed to wireless connection. Direct data connection relies on a serial cable or a USB cable (sometimes plus an auxiliary cradle) between the two.
Page 54: Use Cradle
Chapter 1 Use Mobile Computer 1.8.2. USE CRADLE Direct data connection using a cradle: 1) Seat the mobile computer in a Charging and Communication Cradle (hereinafter “cradle”). 2) Connect the cradle to your PC with a USB cable. Fix the cable to both sides. 3) Power on the mobile computer if you haven’t.
Page 55: Syncing Tools
CP50 Mobile Computer Reference Manual 1.8.3. SYNCING TOOLS Microsoft’s syncing tools enables users to update or back up the data on their handheld computers to desktop computers. Two syncing tools are featured by Microsoft - ActiveSync and Windows Mobile Device Center (hereinafter “WMDC”).
Page 56: St Usb Sync
Chapter 1 Use Mobile Computer 1.8.5. 1 USB SYNC This section will guide you to USB syncing. For Bluetooth syncing, see Bluetooth ActiveSync. To connect ActiveSync using USB: 1) Download the right syncing tool as described in Syncing Tools and install it on your PC. 2) Connect the mobile computer and your PC as described in Use Cable Cradle.
Page 57 CP50 Mobile Computer Reference Manual 5) Press Next button for “Synchronization Relationship”, or press Cancel button for “Temporary Relationship” if you don't plan to connect to the PC on a regular basis. If you have pressed Next, follow the onscreen instructions to go through the setup of “Synchronization Relationship”.
Page 58: Disconnect Usb Activesync
Chapter 1 Use Mobile Computer 1.8.6. DISCONNECT USB ACTIVESYNC To disconnect USB ActiveSync: 1) On your PC, open ActiveSync by double-clicking its icon in the notification area. ActiveSync opens. 2) From the menu bar, click File | Connection Settings. [Connection Settings] window opens. 3) Deselect Allow USB connections.
Page 59: Activesync Actions To Take
CP50 Mobile Computer Reference Manual 1.8.7. ACTIVESYNC ACTIONS TO TAKE Once “Synchronization Relationship” or “Temporary Relationship” is up between two computers, a variety of actions can be taken to enhance the resources sharing between them as previously mentioned in Sync Partnership.
Page 60 Chapter 1 Use Mobile Computer ADD/REMOVE PROGRAMS Basically applications to be installed on the mobile computer need to be stored on your PC first. So download the application programs and store them on your PC so they can be installed onto the mobile computer later. Many application programs are installed in different ways.
Page 61 CP50 Mobile Computer Reference Manual 4) Select the application program(s) to install to the mobile computer, and deselect the application program(s) to uninstall from the mobile computer. 5) Hit the OK button. ActiveSync proceeds to install programs and/or remove programs to/from the mobile computer.
Page 62 Chapter 1 Use Mobile Computer 4) Double-click My Windows Mobile-Based Device My Windows Mobile-Based Device opens. 5) Double-click Program Files. Program Files folder opens. This is where the downloaded applications are normally installed on the mobile computer’s local storage. In the folder, each sub-folder stores an application. 6) Open the folder of the application to create shortcut for.
Page 63 CP50 Mobile Computer Reference Manual You can also add a file shortcut to Start screen right by the mobile computer. See Add Items to Start Screen for more details. REMOVE SHORTCUTS FROM START SCREEN Note the inherent shortcuts aren’t removable. Only the added shortcuts are removable.
Page 64 Chapter 1 Use Mobile Computer Option Description Automatic Auto-detects proxy This option detects if a proxy should be used when passing connections through the PC. If yes, configure the proxy on the mobile computer. This option best suits connecting to a PC (laptop) that may be used at home (with no proxy), as well as to a corporate network (with proxy).
Page 65: Charging & Communication Cradle
CP50 Mobile Computer Reference Manual 1.9. CHARGING & COMMUNICATION CRADLE The direct Charging & Communication Cradle is developed for what its name announces. It isn’t provided bundled but an accessory to opt for. This cradle saves you from the trouble of perpetual plugging and unplugging USB/serial cable.
Page 66: Overview
Chapter 1 Use Mobile Computer 1.9.2. OVERVIEW Figure 14: Cradle Overview Number Description Main charging station Spare battery charging station Main charging station status LED. This status LED lights on green when external power is connected. Spare battery charging station status LED. This status LED delivers the following conditions: Status Description...
Page 67: Pistol Grip
CP50 Mobile Computer Reference Manual 1.10. PISTOL GRIP As an accessory to opt for, the Pistol Grip is a snap-on handle that gives the mobile computer not only gun form factor but also trigger capability for intensive scanning. 1.10.1. INSTALL PISTOL GRIP Slide the terminal into pistol grip until it clips in place.
Page 68: Audio Playback
Chapter 1 Use Mobile Computer 1.11. AUDIO PLAYBACK Use a headset for audio playback and hands-free telephone communication. The headset jack (3.5 mm DIA) is built up on one side of the mobile computer and sealed with a hinged rubber. Open the rubber to reveal the headset jack. Plug the connector of your headset to the jack.
Page 69 CP50 Mobile Computer Reference Manual Turns up and down system and in-call volumes. Figure 16: Physical Volume Rocker ONSCREEN VOLUME GAUGES The onscreen volume gauges adjust all three of system, phone ringer and in-call volumes. To adjust any of them: 1) Tap Title bar at the top of the screen.
Page 70: Data Capture
Chapter 2 DATA CAPTURE Although highly converged, the mobile comptuer is a dedicated barcode/RFID reader. The mobile computer ships with either a (laser) 1D reader or 2D imager and sometimes plus an RFID reader. A number of symbologies and RFID tags are supported and data about them can be decoded and collected.
Page 71: Launch Reader Module(S)
The mobile computer reads printed barcodes and RFID tags. The reader modules can be a (laser) 1D reader plus an RFID reader, or a 2D imager plus an RFID reader. It relies on CipherLab’s ReaderConfigMobile.exe to launch the reader module(s). ReaderConfigMobile.exe is provided bundled with the mobile computer. Run it to launch reader module(s).
Page 72: Read Printed Barcodes & Rfid Tags
Chapter 2 Data Capture 2.2. READ PRINTED BARCODES & RFID TAGS Before start collecting data, configure reader module(s) using ReaderConfigMobile.exe as described in Configure Reader(s), or skip the configuration and go straight to collect data. To collect data: 1) Launch the reader module(s) as described in Launch Reader Module(s).
Page 73: Configure Reader(S)
CP50 Mobile Computer Reference Manual 2.3. CONFIGURE READER(S) ReaderConfigMobile.exe is meant to launch and configure reader modules. Use it to create the application that best suits your needs. To open ReaderConfigMobile.exe: 1) On Start screen, tap CipherLabUtilities CipherLabUtilities opens. 2) Tap Reader Configuration ReaderConfigMobile.exe launches in context with the reader module(s) on board the...
Page 74 Chapter 2 Data Capture General tabbed page [RFID Reader] & [Mifare Keys] are only available when the mobile computer includes an RFID reader Recovers default settings. Maximizes the utility’s window when relaunch Delivers test-scan result The facilities on General tabbed page are tabulated as follows: Setting Facility Description...
Page 75 CP50 Mobile Computer Reference Manual BARCODE READER Barcode Reader features a check box and a GUI button on General tabbed page. The check box is selected by default. Deselect it to disable the 1D (laser) reader or 2D imager, which is occasionally needed when an RFID reader coexists on the mobile computer and you only want the RFID tags to be read, lest printed barcodes should be read and decoded.
Page 76 Chapter 2 Data Capture Timeout between Sets the time for the barcode reader to resurrect its ability 1 sec symbologies to once more decode a barcode it just decoded. Only available for Continuous mode. Caps Lock Capitalizes the literal-characters among decoded data. None Inter Character Delay Sets the delay time between each output character (by...
Page 77 CP50 Mobile Computer Reference Manual RFID READER When an RFID reader is detected, RFID Reader becomes available on General tabbed page. RFID Reader comes with a check box selected by default. Deselect it to disable the RFID reader on the mobile computer. This is occasionally needed when you only want to read printed barcodes, lest RFID tags should be read and decoded.
Page 78 Chapter 2 Data Capture Featured settings are enumerated as follows: READ BLOCKS SETTINGS Setting Descriptions Default Read blocks Reads data from an RFID tag Selected Login Key Shows what key A and key B currently is. Key A & FFFFFFFFFFFF Keys A and B are what the RFID reader module relies on to access (read or write) an RFID tag.
Page 79 CP50 Mobile Computer Reference Manual default blocks (also “pages”), and different amount of bytes and number of blocks. The data written is truncated to fit the blocks of the targeted RFID tag. Therefore part of the data may be discarded when it comes to the end of a block end.
Page 80 Chapter 2 Data Capture Settings Descriptions Default Key A Assigns new key A, which must be a hex string of 12 bytes. If it is the other key (key B) that you want to change, you still need to assign the current key A here to be able to enact the change.
Page 81 Call Windows API (ReadMsgQueue) in your application to retrieve decoded data. Note: (1) To know more about Windows Message and Windows Event, see CP50 programming guides. Sample programs are provided on request. (2) If you don’t want to use ReaderConfigMobile.exe, a dynamic-link library (DLL) file is at...
Page 82 Chapter 2 Data Capture HOW TO OUTPUT After where to output is set, configure how to output decoded data, i.e. the “format” to present decoded data. Setting Description Default Auto ENTER Adds an ENTER character before or after each scanning act. Scan + This function saves the trouble pressing [Enter] key to ENTER...
Page 83: Symbologies Tabbed Page
CP50 Mobile Computer Reference Manual Notification setting page opens. [Notification] settings Featured settings are: Setting Descriptions Default Good read via speaker Enables/disables speaker to sound for good read. Enabled & Sounds 1 to 9 are configurable. Sound 1 Vibration duration...
Page 84: About Tabbed Page
Chapter 2 Data Capture The software launches showing General tabbed page. 2) Tap Symbologies tab. Symbologies tabbed page opens. Symbologies tabbed page For the details about the featured settings, hit the links below: See Appendix II: 1D Laser Symbology Settings. See Appendix III: 2D Imager Symbology Settings.
Page 85 CP50 Mobile Computer Reference Manual About tabbed page opens. About tabbed page...
Page 86: Camera
Chapter 3 CAMERA The mobile computer is adorned with a 5.0 mega-pixel camera that doubles as a camcorder. The O.S. provides a camera/camcorder application, which launches the camera, takes pictures, shoots videos and stores the works on the mobile computer’s storage where they can be viewed, edited and output.
Page 87: Launch Camera
CP50 Mobile Computer Reference Manual 3.1. LAUNCH CAMERA To launch the camera: 1) On Start screen, tap Camera 2) Simply press the physical camera shutter button. Camera opens in portrait mode and readies to take pictures. 3.1.1. CAMERA SCREEN Camera opens showing subject area on the screen with a few pieces of status info at the upper-left and date/time info at the upper-right.
Page 88: Take Pictures
Chapter 3 Camera 3.2. TAKE PICTURES By default, pictures are taken with JPEG format and saves to the mobile computer’s internal storage at My Device\My Documents\My Pictures. To change the default, see Camera Settings. To take a picture: 1) Turn on camera as described in Launch Camera.
Page 89: Camera Settings
CP50 Mobile Computer Reference Manual If preview screen is enabled, the picture you just took displays for a moment for preview. to email the picture by the mobile computer’s data connections or tap discard it. Currently previewed picture size Picture preview “Save-to”...
Page 90 Chapter 3 Camera 2048 x 1536 2592 x 1944 Sets quality for the picture to take. Options are: High Medium Affixes date/time stamps to the picture to take. Date/time stamps are fixed at the upper-right of pictures. Enables/disables previewing the picture to take, and sets how long to preview it. Options are: 3 sec 5 sec...
Page 91: Launch Camcorder
CP50 Mobile Computer Reference Manual 3.3. LAUNCH CAMCORDER 1) Launch camera as described in Launch Camera. Normally camera opens in portrait mode and readies to take pictures rather than shooting video so when it opens you have an icon on menu bar.
Page 92: Shoot Videos
Chapter 3 Camera 3.4. SHOOT VIDEOS By default, videos are shot in WMV format and saves to the mobile computer’s internal storage at My Device\My Documents\My Pictures. To change the default, see Camera Settings. To shoot a video: 1) Launch camcorder as described in Launch Camcorder.
Page 93: Camcorder Settings
CP50 Mobile Computer Reference Manual If preview is enabled, once the video is worked out, a preview screen shows the very first image of the video for a moment. Tap to email the video by the mobile computer’s data connections or tap to discard it.
Page 94 Chapter 3 Camera Camcorder is supported by some camera settings. These settings should be made on camera’s menu bar. Menu Icon Description Sets where to store the video to shoot. Options are: : the mobile computer’s internal storage (at My Device\My Documents\My Pictures by default) : the external storage i.e.
Page 95: Pictures & Videos
CP50 Mobile Computer Reference Manual 3.5. PICTURES & VIDEOS Pictures & Videos is an application that views and edits the pictures taken and videos shoot, or those copied or downloaded. It also sets background for Today Screenand Start Screen, and sets avatars for your contacts. It also emails pictures and videos.
Page 96 Chapter 3 Camera The picture displays or the video starts to play onscreen. TAKE OTHER ACTIONS TO A VIDEO OR A PICTURE To edit, manage or take other actions to a video or picture: 1) Open Pictures & Video as described in Launch Pictures &...
Page 97 CP50 Mobile Computer Reference Manual...
Page 98: Operating System
Chapter 4 OPERATING SYSTEM The mobile computer is powered by Windows Embedded Handheld 6.5, a member of Windows Embedded family branded for full compatibility with Windows Mobile 6.5. Windows Embedded Handheld 6.5 features a prettier UI and a slew of fresh new looks unseen in the predecessor Windows CE.
Page 99: St Startup
CP50 Mobile Computer Reference Manual 4.1. 1 STARTUP Finished with the setup as described in Main Battery Setup Insert SD Card, proceed to power on the mobile computer as described in Power On/Off. If you haven’t installed a SIM card, the mobile computer isn’t able to connect to mobile networks for phone or data.
Page 100: Today Screen
Chapter 4 Operating System 4.2. TODAY SCREEN It is Today screen that shows when the mobile computer powers on or gets unlocked. Today screen shows a scrollable list of applications such as pictures, music, phone, voicemail, clock & time and so on, and the application in the center is always the active one. When an application is active, it displays additional information, and command button(s) come(s) up on Softkey bar...
Page 101 CP50 Mobile Computer Reference Manual The screenshot below shows the mobile computer has one missed call and 2 unread text messages. Notification area Today screen One missed call Two text messages received Take the action below to follow up: 1) Move the scroll bar to an application that needs management.
Page 102: Customize Today Screen
Chapter 4 Operating System 4.2.1. CUSTOMIZE TODAY SCREEN Customize Today screen to change its appearance and presented items. To customize Today screen: 1) Tap Windows icon Softkey bar or hit physical Windows key 2) Tap Settings | Home. Home settings open. 3) Select between Appearance and Items tabs.
Page 103: Start Screen
CP50 Mobile Computer Reference Manual 4.3. START SCREEN Start screen is where all features on the mobile computer are accessed from. This screen lays out the application icons, shortcuts and so on in a staggered manner so each icon are more touchy and icons allowed onscreen are increased.
Page 104: Return To Start Screen
Chapter 4 Operating System 4.3.1. RETURN TO START SCREEN Tap Windows icon Softkey bar or hit physical Windows key to return to Start screen. 4.3.2. TITLE BAR At the top of almost every screen is Title bar. It shows a title on the left and a notification area on the right.
Page 105 CP50 Mobile Computer Reference Manual HSDPA connected EDGE network available EDGE connected GPRS network available GPRS connected Call in progress Call on hold Speakerphone on Missed call Phone off SIM card locked. PIN code required to turn on phone. Phone on with signal strength...
Page 106: Manage Notifications
Chapter 4 Operating System 4.3.3. MANAGE NOTIFICATIONS Since status/notification icons are relative small, tap Title bar to drop it down to have larger and touchy icons. Tap Title bar to open a drop-down bar. Drop-down bar opens. Checks what the O.S.
Page 107 CP50 Mobile Computer Reference Manual Opens the reminder for an alarm or appointment. Bluetooth A2DP profile in use. Tap it to access Bluetooth devices list. Checks a missed call. Checks a new e-mail. Opens Text application. Speakerphone on Roaming on RESPOND TO NOTIFICATIONS 1) Tap Title bar to open Drop-down bar.
Page 108: Customize Start Screen
Chapter 4 Operating System 4.3.4. CUSTOMIZE START SCREEN Customize Start screen by changing the background, application shortcuts, and so on. Rearrange the application shortcuts to make the applications that you use most often easiest to access. CHANGE BACKGROUND Craft your Start screen and Today screen with any of your own pictures or a number of designer’s themes bundled with the O.S.
Page 109 CP50 Mobile Computer Reference Manual A context menu comes up. 4) Tap Copy. 5) Browse to My Device\Windows\Start Menu\Programs. Programs folder opens. 6) Tap & hold any vacancy onscreen. Context menu comes up 7) Tap Paste Shortcut. The application shortcut is added to Start screen.
Page 110 Chapter 4 Operating System File Explorer opens. 2) Browse to My Device\Windows\StartMenu\Programs. Programs folder opens. This is where all application/bookmark/file shortcuts are. 3) Tap & hold the shortcut to remove. Context menu comes up. 4) Tap Delete. The shortcut to is removed from Start screen.
Page 111: Start Screen Icons
CP50 Mobile Computer Reference Manual 4.3.5. START SCREEN ICONS Start screen presents a number of icons in a staggered pattern that makes them easier touchable. Each icon opens an application, folder or a group of settings when it is tapped.
Page 112 Chapter 4 Operating System Office Mobile Opens Microsoft Office suite applications including Excel Mobile, 2000 SharePoint WorkSpace Mobile, OneNote Mobile, Word Mobile, and PowerPoint Mobile. Camera Takes pictures and shoots videos. See Chapter Camera for details. Windows Media Plays audio/video files. Marketplace An online software download/purchase service which was shut down on 22...
Page 113 CP50 Mobile Computer Reference Manual SimTkUI Accesses the WAP/XML services provided by your mobile carrier.
Page 114: Suspend & Reset Mobile Computer
Chapter 4 Operating System 4.4. SUSPEND & RESET MOBILE COMPUTER To get rid of the annoying charging and replacing battery procedure more often than you would like to, suspend the mobile computer when you are not actively using it. “Suspension” is a state to hold the device from running without turning off power. It is a “soft-off”...
Page 115: Wake Up Mobile Computer
CP50 Mobile Computer Reference Manual Note the following cases also suspend the mobile computer: Battery door isn’t in place. Main battery level drops under 6%. Battery fails. To get the most from the battery power, see Optimize Battery Life. 4.4.2. WAKE UP MOBILE COMPUTER “Waking up”...
Page 116 Chapter 4 Operating System WARM BOOT (SOFT RESET) “Warm boot” is also known as “soft reset”. When the mobile computer runs slower than normal or when one or more active applications crash, perform warm boot to close all active applications and restart the mobile computer without turning off power supply to hardware. After warm boot, all flash memory and clock/calendar time are kept, and all saved data are preserved.
Page 117: Set Screen Lock
CP50 Mobile Computer Reference Manual 4.5. SET SCREEN LOCK Out of security concern, you may want to restrict the access to the mobile computer by a unique lock you create. The O.S. supports setting up a password to recover the access to the mobile computer.
Page 118: Work With Menus
Chapter 4 Operating System 4.6. WORK WITH MENUS The O.S. presents two kinds of menus: option menus and context menus. By these menus, users are able to operate onscreen and use applications. 4.6.1. OPTION MENUS Normally a screen or an active application features a “Menu” command Softkey bar to launch an “option menu”, which causes actions to be taken by the screen or the active application.
Page 119: Context Menus
CP50 Mobile Computer Reference Manual Note some screens/applications may not have an option menu. A screen that doesn’t feature a “Menu” command on Softkey bar. An example of Start screen. 4.6.2. CONTEXT MENUS The context menu on the other hand contains the actions to be taken to a specific item selected onscreen.
Page 120: Manage Applications
Chapter 4 Operating System 4.7. MANAGE APPLICATIONS On Windows Embedded Handheld 6.5, Start screen is where all the O.S.’ inherent applications are accessed from. In the O.S., when you run an application, the other applications that have been running don’t stop but keep on running whether it is music that is played or the webpage that is being browsed.
Page 121 CP50 Mobile Computer Reference Manual MONITOR OPENED APPLICATIONS Task Manager launches monitoring opened applications: Delivers the application’s memory usage. Tap to Task Manager screen ascend/descend the Label of “Application” entries. says opened applications are being monitored now. Deliver the application’s CPU usage.
Page 122 Chapter 4 Operating System Task Manager is monitoring opened applications Tap & hold an entry to pop up the context menu. Context menu opens. SWITCH TO ANOTHER OPENED APPLICATION To switch to another opened application: 1) Launch Task Manager as described in Launch Task Manager.
Page 123 CP50 Mobile Computer Reference Manual Task Manager shifts to monitor processes. Task Manager monitors cached processes. Note: Stopping an application or operating system processes or services may interrupt one or more dependant functions on the mobile computer. You may need to restart the mobile computer to recover full functionality.
Page 124 Chapter 4 Operating System This screenshot shows downloading an Download starts and proceeds. application program mobile computer. When asked to confirm the download, tap the “Yes” command on Softkey bar. If an SD card is equipped, you’re asked Installation progresses. where to install the application;...
Page 125 CP50 Mobile Computer Reference Manual Installation completes. Tap “OK” command to finish and quit installation. UNINSTALL APPLICATIONS On the mobile computer, the acquired (non-inherent) applications are subject to your manual uninstallation. To uninstall an application: 1) On Start screen, tap Settings | System | Remove Programs Remove Programs opens showing the applications downloaded and installed from external sources.
Page 126 Chapter 4 Operating System The lower-right “Remove” button becomes available. 3) Tap the “Remove” button to uninstall the application. 4) Follow onscreen instruction to complete through the uninstallation.
Page 127 CP50 Mobile Computer Reference Manual...
Page 128: Radios
Chapter 5 RADIOS The mobile computer is a versatile networker. It integrates Wi-Fi and Bluetooth for wireless data, and optionally a HSPA+ (3.8G) module for mobile data. It also includes an GPS receiver to calculate your locations on earth with street-level accuracy. By the radios, the mobile computer keeps the business online all the time.
Page 129: Access Cellular Wan
CP50 Mobile Computer Reference Manual 5.1. ACCESS CELLULAR WAN When you insert a SIM card and turn on the mobile computer, the mobile computer connects to your mobile carrier’s cellular wide area networks for data. Different locations may have different mobile networks available. The mobile computer auto-connects to the fastest mobile network available for data.
Page 130: Enable/Disalbe Mobile Data
Chapter 5 Radios Network tabbed page opens showing the network currently connected to at the top. Phone settings Network tabbed page Network you’re currently using 5.1.3. ENABLE/DISALBE MOBILE DATA To turn on/off the mobile computer’s mobile data (HSPA+): 1) On Start screen, tap Settings | Connections | Wireless Manager Wireless Manager opens.
Page 131: Cellular Data Setup
CP50 Mobile Computer Reference Manual GSM/UMTS tabbed page opens. 6) Tap GSM (2G Only) from the drop-downs. 7) Tap Apply to apply the change. 8) Tap the “OK” command on Softkey bar to quit setting. 5.1.5. CELLULAR DATA SETUP To set up mobile data (GPRS/EDGE/UMTS/HSPA): 1) On Start screen, tap Settings | Connections | Connections (Manager) Connections setting opens showing Tasks tabbed page.
Page 132: Edit & Add Access Points
Chapter 5 Radios If you have two or more different networks set up, tapping and holding an item provides options for you to either delete or connect to the selected network. Tap and hold the selected item. Context menu pops up. Note to turn off Wi-Fi to access mobile data because Wi-Fi supersedes mobile data.
Page 133: Usb Internet Sharing
CP50 Mobile Computer Reference Manual My ISP setting Modem tabbed page shows by default. Tap the connection to edit. Tap the “Edit” command on Softkey bar to edit the APN selected onscreen. 4) Tap the APN to edit. The APN to edit is selected onscreen, and the “Edit” command becomes available on Softkey bar.
Page 134 Chapter 5 Radios Internet Sharing opens. Internet Sharing 3) Select USB for PC Connection, and select your mobile service for Network Connection. 4) Tap the “Connect” command on Softkey bar to start Internet tethering. The mobile computer prompts “Connected” in a few seconds when the PC connects to Internet.
Page 135: Use Wi-Fi
CP50 Mobile Computer Reference Manual 5.2. USE WI-FI The mobile computer is capable of Wi-Fi, a wireless networking technology making use of an access point, also known as “hotspot”, to connect to a wireless local area network. To use Wi-Fi, the mobile computer has to connect to a hotspot. Some hotspots are open to connect while others request for a key to authenticate access.
Page 136: Wi-Fi Connection Setup
Chapter 5 Radios Wi-Fi is on or off. Once Wi-Fi is on, the mobile computer starts scanning for the available Wi-Fi networks within its reach. The O.S. shortly displays a “Multiple Networks Detected” dialog prompting a few names of those found. “Multiple Networks Detected”...
Page 137 CP50 Mobile Computer Reference Manual 1) From “Multiple Networks Detected” dialog, tap Show all networks link to bring all detected networks into view. Wi-Fi settings open showing Wireless tabbed page. It displays both open and secured networks with signal strength. Secured networks have a lock graphic on them.
Page 138 Chapter 5 Radios 2) Tap the network to connect. “Configure Wireless Network” page opens. Configure Wireless Network For Connects to, select between The Internet and Work. Select The Internet if you’re using the network to access the Internet; or select Work if you’re using the network to access an internal network, i.e.
Page 139 CP50 Mobile Computer Reference Manual If the network to connect to is secured, you’re prompted to enter a password or other credentials. Ask your network administrator for the details. 4) Tap Next to proceed. 5) Follow onscreen instruction to follow through the setup.
Page 140: Connect Another Wi-Fi Network
Chapter 5 Radios 5.2.4. CONNECT ANOTHER WI-FI NETWORK To connect to another Wi-Fi network: 1) Open Wi-Fi’s Wireless tabbed page. (Start screen | Settings | Connections | Wireless Manager | Softkey bar “Menu” command | Wi-Fi Settings.) Wi-Fi’s Wireless tabbed page opens. 2) Tap &...
Page 141: Add Wi-Fi Networks
CP50 Mobile Computer Reference Manual Wi-Fi’s Advanced settings open: Wi-Fi’s Advanced settings 4) Deselect Turn on available network notifications. See also Advanced Wi-Fi Settings. 5.2.8. ADD WI-FI NETWORKS “Adding” Wi-Fi networks are usually needed for the following cases: when it doesn’t broadcast its name (SSID), or when you’re out of its wireless coverage...
Page 142: Connect By Static Ip
Chapter 5 Radios 5.2.9. CONNECT BY STATIC IP When the mobile computer connects to a Wi-Fi network by DHCP protocol, the mobile computer fetches a network address and other info needed from the network. But when you are connecting a Wi-Fi network by a fixed IP address, make the following setting: 1) Turn on Wi-Fi as described in Enable/Disable Wi-Fi.
Page 143: Advanced Wi-Fi Settings
CP50 Mobile Computer Reference Manual 5.2.10. ADVANCED WI-FI SETTINGS Access advanced Wi-Fi settings for the following: To turn on/off available network notifications. To set the time to turn off Wi-Fi after Wi-Fi connection keeps failing To set the network to access only hotspots or computer-to-computer (ad-hoc) or both.
Page 144: Use Bluetooth
Chapter 5 Radios 5.3. USE BLUETOOTH The mobile computer is Bluetooth-enabled to synchronize data with other devices such as PCs, car hands-free, headsets, printers, PDAs, and cell phones. Bluetooth enables wireless connections over a short distance about 8 meters. It is specified in IEEE 802.15.1 as a “wireless personal area network”...
Page 145: Expose Mobile Computer
CP50 Mobile Computer Reference Manual 5.3.3. EXPOSE MOBILE COMPUTER In default state the mobile computer is hidden from other Bluetooth devices. To come clean about the mobile computer, make the following setting: 1) On Start screen, tap Settings | Bluetooth Bluetooth settings open showing Devices tabbed page.
Page 146: Turn On/Off Bluetooth
Chapter 5 Radios 5.3.4. TURN ON/OFF BLUETOOTH To turn on/off Bluetooth: 1) On Start screen, tap Settings | Connections | Wireless Manager Wireless Manager opens. 2) Tap the Bluetooth entry. Bluetooth powers on. 1) On Start screen, tap Settings | Bluetooth Bluetooth’s Devices tabbed page opens.
Page 147 CP50 Mobile Computer Reference Manual 3) Tap Add new device… The mobile computer scans and displays the names of all Bluetooth devices found within reach. Bluetooth scanning result screen Tap to scan again. If the device to pair with doesn’t display, make it discoverable. If the mobile computer stops scanning before the device to connect becomes discoverable, tap Refresh.
Page 148: Disconnect Bluetooth Devices
Chapter 5 Radios Tap the “Advan…” command on Softkey bar, which only briefly shows, to configure the Bluetooth features to use with that device. Then tap Save. Devices tabbed page re-opens listing the just connected Bluetooth device among others. A device connected is listed under Connected label. A paired but unconnected device is listed under Disconnected label.
Page 149: Unpair Bluetooth Devices
CP50 Mobile Computer Reference Manual The mobile computer is disconnected from the Bluetooth device. 5.3.7. UNPAIR BLUETOOTH DEVICES To unpair a Bluetooth device: 1) Open Bluetooth settings. (Start screen | Settings | Bluetooth.) Bluetooth settings open showing Devices tabbed page.
Page 150: Bluetooth File Exchange
Chapter 5 Radios Partnership Settings opens listing the device’s available profiles. Partnership Settings 4) Select or deselect a profile to use it or not. 5.3.10. BLUETOOTH FILE EXCHANGE Once connected with other devices using Bluetooth, the mobile computer can offload or download files to/from them.
Page 151 CP50 Mobile Computer Reference Manual The Bluetooth application generates a list of Bluetooth devices found. 6) Select the device to offload the file to. The device will receive a notification asking for confirmation to accept the file. 7) Confirm accept.
Page 152: Bluetooth Activesync
Chapter 5 Radios 5.3.11. BLUETOOTH ACTIVESYNC The advantage of Bluetooth ActiveSync is to save the trouble perpetually switching between multiple devices by changing cables or adapters. Note to disable network bridging on your PC (specifically bridging to a Remote NDIS adapter) before connecting Bluetooth ActiveSync.
Page 153: Bluetooth Internet Sharing
CP50 Mobile Computer Reference Manual DISCONNECT BLUETOOTH ACTIVESYNC To disconnect Bluetooth ActiveSync: 1) On the mobile computer, tap ActiveSync from Start screen. ActiveSync opens. 2) Tap the “Menu” command on Softkey bar. Option menu opens. 3) Tap Disconnect. Bluetooth ActiveSync is disconnected.
Page 154: Bluetooth Pass-Through Networking
Chapter 5 Radios In a few seconds Internet Sharing prompts “Connected” on the mobile computer. Your PC connects to Internet. Internet Sharing “Connected” prompted. Tap to stop Bluetooth Internet Sharing Tap the “Discon…” command on Softkey bar to stop. For the internet sharing using USB, see USB Internet Sharing.
Page 155: Connect To Virtual Private Networks
CP50 Mobile Computer Reference Manual 5.4. CONNECT TO VIRTUAL PRIVATE NETWORKS Virtual Private Networks (VPN) are a group of individual networks on a public network (such as the Internet) that connect to each other by private lines and communicate among themselves by encryption technology so their data are kept safe from unauthorized access.
Page 156 Chapter 5 Radios 2) Under My Work Network label, tap Add a new VPN server connection. “Make New Connection” page opens. “Make New Connection” page 3) Complete each VPN settings. Consult your network administrator for the protocol employed on the VPN and other requested credentials. 4) Follow onscreen instructions to proceed.
Page 157: Connect Vpn
CP50 Mobile Computer Reference Manual 5.4.2. CONNECT VPN After a VPN connection is set up as described in VPN Connection Setup, a link Edit my VPN servers shows up under My Work Network. Move on to connect to the prospective VPN.
Page 158: Disconnect Vpn
Chapter 5 Radios A dialog briefly displays noticing the attempt to connect. In a few seconds, the VPN is connected. Once connected, the mobile computer makes a sound as per Sounds & Notifications settings. 5.4.3. DISCONNECT VPN The O.S. doesn’t feature any facility or mechanism to disconnect VPN, consider using a third-party application to disconnect VPN.
Page 159 CP50 Mobile Computer Reference Manual My Work Network’s VPN tabbed page opens. 3) Tap & hold the VPN to edit. Context menu shows up. 4) Tap Delete. The VPN is deleted.
Page 160: Install Secure Certificates
Chapter 5 Radios 5.5. INSTALL SECURE CERTIFICATES To connect to a VPN or Wi-Fi network that deploys secure certificates, the mobile computer must have these certificates. Where the mobile computer stores these secure certificates is called “certificate store”. Windows Embedded Handheld 6.5 has three “certificate stores” – the Personal, Intermediate and Root certificate stores.
Page 161 CP50 Mobile Computer Reference Manual Certificate installer installs the file. 4) Follow the onscreen instructions to proceed. Once the installation completes, it can be viewed in Certificates . (See Certificates.)
Page 162: Location Discovery
Adorned with a GPS module, the mobile computer is capable of finding your location on earth. GPS relies on the satellites covering the sky around the world to pinpoint your whereabouts. With mobile data (HSPA+ (3.8G); available on CP50 G), the mobile computer even delivers A-GPS, which accelerates location discovery by combining GPS and cell-tower-distance triangulation.
Page 163: Use Gps & Agps
CP50 Mobile Computer Reference Manual 5.6.2. USE GPS & AGPS To discover locations by GPS or AGPS: 1) Launch GPS & AGPS as described in Launch GPS & AGPS. Note to use AGPS, your mobile computer must have a HSPA+ (3.8G) module and your network must support it.
Page 164 Chapter 5 Radios 5) Tap Bluetooth Settings. Bluetooth settings open showing Devices tabbed page. Bluetooth’s Device tabbed page 6) Tap Mode tab. Mode tabbed page opens. Mode tabbed page 7) Select Turn on Bluetooth and Make this device visible to other devices if the two options aren’t selected..
Page 165 CP50 Mobile Computer Reference Manual Devices tabbed page Tap your GPS receiver. 10) Select your GPS receiver and tap the “Next” command on Softkey bar. Your GPS receiver may request for a passcode to create a secure connection. Enter a code that is consistent on both devices.
Page 166 Chapter 5 Radios And Devices tabbed page opens again listing your GPS receiver. If it is paired but not connected, it is listed under Disconnected label. If it is paired and connected, it is listed under Connected label. Paired or paired & connected depends on the device’s Bluetooth feature(s) enabled for the mobile computer at the moment.
Page 167 CP50 Mobile Computer Reference Manual COM Ports tabbed page opens. COM Ports tabbed page. 13) Tap New Outgoing Port. Bluetooth’s Add a Device page opens. Add a Device page 14) Select the GPS receiver and tap the “Next” command on Softkey bar.
Page 168 Chapter 5 Radios A page opens showing a Port setting and a Secure Connection setting. A page opens providing settings of COM port and security. 15) Select a port number (avoiding COM 7 and COM 9). COM 7 is system’s default GPS software COM port, and COM 9 is the hardware COM port for the built-in GPS receiver.
Page 169 CP50 Mobile Computer Reference Manual 17) Tap the “OK” command on Softkey bar to apply change and quit setting. 18) Open Start screen, tap Settings | System | External GPS GPS settings open showing Programs tabbed page. Programs tabbed page The page shows the virtual COM port for GPS applications set to COM7, the default.
Page 170 Chapter 5 Radios 20) Select the COM port your external GPS hardware was configured to use as you have noted in step 14. Hardware tabbed page Select the COM port as you have noted in step 14. 21) Tap Access tab. Access tabbed page opens.
Page 171: Use Secure Access Module
CP50 Mobile Computer Reference Manual 5.7. USE SECURE ACCESS MODULE The mobile computer is enhanced with a Secure Access Module (hereinafter “SAM”) to deliver payment-related applications by courtesy of a HF RFID reader integrated. SAM enables the authentication and encryption of the contact-less communication between the smart-card, the reader (mobile computer), and the backend host in a secure way.
Page 172: Phone
Chapter 6 PHONE With a SIM inserted, the mobile computer is capable of voice calls and data calls. By voice calls, you place and receive phone calls or text somebody on your contact list with the Phone application provided by the O.S. This chapter guides to the phone’s voice calls only.
Page 173: About Phone
CP50 Mobile Computer Reference Manual 6.1. ABOUT PHONE The mobile computer supports the following type of cellular technology for voice calls: UMTS 6.2. SIM CARD To use the mobile computer’s phone, have a SIM card from your mobile carrier. Activate the SIM card and assemble it to the mobile computer.
Page 174: Status Icons
Chapter 6 Phone 6.3. STATUS ICONS Status icons for phone connection: Status Icon Description Phone off SIM card locked. PIN code required to turn on phone. Phone on with signal strength. The more bars are lit, the stronger the signal A call is being placed or a call is in progress Missed call(s) Connected to another mobile carrier’s network (roaming)
Page 175: Phone Ringtone & Vibrate
CP50 Mobile Computer Reference Manual 6.4. PHONE RINGTONE & VIBRATE Setting phone ringtone and phone vibrate for incoming calls relies on Sounds & Notifications To access Sounds & Notifications: 1) Open Start screen, tap Settings | Sounds & Notifications. Sounds & Notifications open showing Sounds tabbed page.
Page 176 Chapter 6 Phone Notifications tabbed page opens. Notifications tabbed page Stop Tries the selected ring type. 3) From Event drop-downs, select Phone: Incoming call. 4) From Ring type drop-downs, select Ring or other ringing types. 5) From Ring tone drop-downs, select the ring tone you prefer. 6) Tap the “OK”...
Page 177: Phone Vibrate
CP50 Mobile Computer Reference Manual 6.4.2. PHONE VIBRATE To set phone vibrate: 1) On Start screen, tap Settings | Sounds & Notifications. Sounds & Notifications opens showing Sounds tabbed page. 2) Tap Notifications tab. Notifications tabbed page opens. 3) From Event drop-downs, select Phone: Incoming call.
Page 178: Place & End Calls
Chapter 6 Phone 6.5. PLACE & END CALLS Use the OS featured Phone application to place calls, text somebody, or check voicemails. The Phone application enables setting up speed dials, managing contacts, and other sophisticated call applications. 6.5.1. OPEN PHONE To open Phone application, there are two approaches: Open Start screen.
Page 179 CP50 Mobile Computer Reference Manual In case entering a wrong number, tap backspace key to withdraw the digit(s) one by one. Tap & hold the backspace key to erase the whole number. To dial an international number, tap & hold 0 key to enter plus (+) symbol.
Page 180 Chapter 6 Phone As soon as the call is placed, the in-call screen opens. Once the call puts through, call duration displays onscreen. In-call screen Mobile carrier Call duration Called number Mutes microphone Turns on/off speakerphone Puts call on hold Ends call Places another call Minimizes in-call screen...
Page 181 CP50 Mobile Computer Reference Manual MANAGE A CALLER Manage a caller to customize phone ring type, ringtone and keypad tone for him/her. 1) When Phone application opens, tap the caller to manage. 2) Tap the “Menu” command Softkey bar. Option/context menu opens.
Page 182: Call History
Chapter 6 Phone 6.5.2. CALL HISTORY When Phone application opens, tap Call History button to open Call History where call log and accumulated call timers can be viewed. Call History also helps add a caller to contacts, delete call log entries, or text back a caller. 1) Open Phone application as described in Open Phone.
Page 183: Speed Dial
CP50 Mobile Computer Reference Manual 6.5.3. SPEED DIAL “Speed Dial” enables users to place a call by pressing a reduced number of keys. It is very helpful to dial some regularly called contacts. LAUNCH SPEED DIAL To launch Speed Dial:...
Page 184: Back To Phone Application
Chapter 6 Phone From the physical keypad, press & hold the number assigned to speed-dial a contact. Note to speed-dial a two-digit contact, tap/press the first digit and then tap/press & hold the second digit. ADD SPEED-DIAL CONTACTS To add a speed-dial contact: 1) Open Speed Dial application as described in Launch Speed Dial.
Page 185: Disable Phone Calls
CP50 Mobile Computer Reference Manual 6.5.5. DISABLE PHONE CALLS There are occasions requiring you to turn off the mobile computer’ radios such as on an airplane. To disable phone: 1) On Start screen, tap Settings | Connections | Wireless Manager Wireless Manager opens.
Page 186: Answer Or Decline Calls
Chapter 6 Phone 6.6. ANSWER OR DECLINE CALLS When you receive a phone call, the incoming call dialog opens showing caller ID and other info about the caller you have entered in Contacts application. (See Call Contacts.) The incoming call screen shows each answer icon and decline icon to pick up or drop the call.
Page 187: Manage Call History
CP50 Mobile Computer Reference Manual 6.7. MANAGE CALL HISTORY Call History shows a list of the calls you have placed, received, and missed. Call History makes it quick and easy to redial a number, return a phone call, or add a contact.
Page 188: View Caller Screen
Chapter 6 Phone You are prompted to select a contact type. 5) Select a contact type. 6) Follow onscreen instructions to proceed. 6.7.3. VIEW CALLER SCREEN Tap a call log entry on Call History to open a screen detailing it, including the date and time the call came about.
Page 189: Take Other Actions To A Call Log Entry
CP50 Mobile Computer Reference Manual 6.7.4. TAKE OTHER ACTIONS TO A CALL LOG ENTRY Tap & hold a call log entry on Call History to take some actions to a call log. 1) Open Call History as described in Open Call History.
Page 190: Call Contacts
Chapter 6 Phone 6.8. CALL CONTACTS Contacts application is sort of the mobile computer’s phone book. It tracks contacts in your call log, emails, instant messages and so on. Besides it also places phone calls for you. 6.8.1. LAUNCH CONTACTS To launch Contacts application: 1) On Start screen, tap the shortcut to Contacts application Contacts application opens listing the contacts along with their phone numbers, email...
Page 191: Check Voicemails
CP50 Mobile Computer Reference Manual 6.9. CHECK VOICEMAILS When a new voicemail comes in, the O.S. sends a notification to you on Title bar for a missed call. Some mobile services send text messages to notice users of voicemail. To check voicemails: 1) Tap Title bar to open Drop-down bar.
Page 192: Options During A Call
Chapter 6 Phone 6.10. OPTIONS DURING A CALL When you are on a call, whether an incoming or outgoing one, you can take a sequence of actions to that call. You can put the call on hold, create a phone conference, mute microphone, and others.
Page 193: Put A Call On/Off Hold
CP50 Mobile Computer Reference Manual BY ONSCREEN VOLUME GAUGE 1) On in-call screen, tap Title bar. Drop-down bar opens. 2) Tap volume icon In-call volume gauge opens. 3) Move the slider up and down the gauge. In-call volume is decreased or increased.
Page 194: Add A Call
Chapter 6 Phone 6.10.5. ADD A CALL To place another call during an ongoing call: On in-call screen, tap Add Call button 6.10.6. OTHER OPTIONS There are other actions to take during a call by tapping the commands on Softkey bar of in-call screen: Tap dial pad icon to open dial pad in case you need to enter additional numbers...
Page 195 CP50 Mobile Computer Reference Manual The O.S. proceeds to fetch your call setting from the phone network. Once fetched, a Phone: Call Waiting page opens. 7) Select Notify me. 8) Tap the “OK” command on Softkey bar to apply change and quit setting.
Page 196: Switch Between Two Callers
Chapter 6 Phone 6.10.8. SWITCH BETWEEN TWO CALLERS Upon picking up the second call, the first call is put on hold, and in-call screen shows the second call info. In-call screen with two callers Second call progresses. Caller ID and number of the second call First call is put on hold once the second call is picked up.
Page 197: Switch Between Bluetooth Headset And Speakerphone
CP50 Mobile Computer Reference Manual 6.10.9. SWITCH BETWEEN BLUETOOTH HEADSET AND SPEAKERPHONE When the mobile computer is using a Bluetooth headset, an icon comes up on Title bar, and a bigger icon shows on Drop-down bar when it opens. When a call comes in, the notice dialog shows an additional graphic of hands-free in the upper right.
Page 198: Make An Emergency Call
Chapter 6 Phone … When you pick up a call on the mobile computer, you need to turn on the hands-free by tapping the “Menu” command Softkey bar and tap Turn on Hands-free to use the hands-free for phone conversation. For details about using Bluetooth peripherals with the mobile computer, see Bluetooth.
Page 199 CP50 Mobile Computer Reference Manual...
Page 200: More Applications
Chapter 7 MORE APPLICATIONS Save for the dedicated ReaderConfigMobile.exe to the mobile computer’s specialty in data capture as mentioned in Chapter 2 Data Capture, more manufacturer-developed applications are preinstalled to strengthen user’s system management and make the mobile computer more eligible. A group of said applications are accessible under Start screen | CipherLabUtilities.
Page 201: Backup Utility
Reference Manual 7.1. BACKUP UTILITY CipherLab’s Backup Utility performs backup and restoration, a process of copying files and putting them back to system. They are very important for a computer or database once it is rendered unusable by any software or hardware error.
Page 202: Registry Backup And Restoration
Chapter 7 More Applications The four tabbed pages are summarized as follows: Tabbed Page Description Registry Backs up system registry. Recovers system registry. Backup Makes duplicate copy of system files. Restore Recovers system files. About Delivers software version and developer info. 7.1.2.
Page 203 CP50 Mobile Computer Reference Manual Use the OS featured Task Manager to monitor cached processes and close opened applications. Upon OK being tapped, backup replication starts and finishes in a fraction of second. Then a dialog pops up to notice of finish.
Page 204: System Files Backup
Chapter 7 More Applications System configuration and application settings are restored to an earlier stable condition. 7.1.3. SYSTEM FILES BACKUP Backing up system files relies on Backup tabbed page. To back up system file(s): 1) Launch Backup Utility as described in Launch Backup Utility.
Page 205 CP50 Mobile Computer Reference Manual In a few minutes, the search is through. The utility shows the discovered file system overlaid by a dialog noticing that all applications should be closed before backup. Tap ok to close dialog. Use the OS featured Task Manager to close opened applications.
Page 206 Chapter 7 More Applications 5) Done with selection and deselection, tap the lower-left Backup button. A Save As screen opens. Save As screen Tap this button to open a screen that changes the saving location and file name. Proceeds to back up Quits backup By default, backup file is saved to \My Device\My Documents with an auto-assigned filename and file extension (*.bkp).
Page 207: System Files Restoration
CP50 Mobile Computer Reference Manual Report screen, with details of backup generation Finishes and quits backup A backup file with .bkp format is generated under \My Device\My Documents for necessary restoration in case of emergency. 7.1.4. SYSTEM FILES RESTORATION For system file(s), as long as any backup is found on the storage, whether internal or external, restoration is available.
Page 208 Chapter 7 More Applications Restore tabbed page opens searching for available backup file(s) on the mobile computer. (If auto-searching doesn’t start, tap the bottom-right Refresh button.) Once search is through, it shows the found in Available backup files box. Select the backup (of system files) to restore Deletes the selected backup (of system files)
Page 209: Button Assignment
CP50 Mobile Computer Reference Manual 7.2. BUTTON ASSIGNMENT Button Assignment is a utility to redefine some physical keys to deliver the functions they weren’t originally obliged with. The re-definable keys are: SCAN key Left/right side-triggers [*] Asterisk key [#] Hash key 7.2.1.
Page 210 Chapter 7 More Applications 2) Tap the GUI button of the key to re-define. Setting page opens. Setting page of a re-definable Recovers the default function of a Defines a key to act as another Defines a key to Browses for the application to quick-launch an quick-launch application...
Page 211: Recover Defaults
CP50 Mobile Computer Reference Manual Search all folders under “\My Device\My Documents” directory, or select other folders to search in. User-defined key code Specifies a key code for a key. This setting comes with a text field that becomes available when the setting is selected.
Page 212: Gps Viewer
Chapter 7 More Applications 7.3. GPS VIEWER The mobile computer includes a GPS module (GPS hardware). This module communicates with Global Positioning System and discovers your location on earth if it has a piece of GPS software to work with. As previously mentioned in Launch GPS &...
Page 213 CP50 Mobile Computer Reference Manual GPS Viewer opens Satellite coverage Date, time, longitude, latitude & PDOP index Satellite signal strength In-motion info In-motion info Altitude Positioning progress Red for no signal (< 9 dB) Green for fair signal strength (10 ~ 29 dB)
Page 214: View Nmea-Based Data
Chapter 7 More Applications 7.3.2. VIEW NMEA-BASED DATA The data standard for GPS communication is NMEA. NMEA use a simple serial protocol to define data syntax. GPS Viewer enables viewing such NMEA data streamed from GPS hardware to software (the application layer). To view NMEA data: 1) Launch GPS Viewer as described in Launch GPS Viewer.
Page 215: Signature Utility
CP50 Mobile Computer Reference Manual 7.4. SIGNATURE UTILITY Signature utility captures, views and edits signature files. 7.4.1. LAUNCH SIGNATURE UTILITY To launch Signature utility: 1) Open Start screen Start screen opens. 2) Tap Signature icon Signature utility opens showing a toolbar along the top and a signing area within its window.
Page 216: Capture Signatures
Chapter 7 More Applications 7.4.2. CAPTURE SIGNATURES To capture signature: 1) Launch Signature utility as described in Launch Signature Utility. Signature utility launches. 2) Use the stylus to sign a name in the signing area. 3) Tap icon to save the signature as an image in BMP, JPG or Locus format. icon to discard the signature and sign again.
Page 217: View Or Edit Existing Signatures
CP50 Mobile Computer Reference Manual 7.4.3. VIEW OR EDIT EXISTING SIGNATURES To view the existing signature(s) on the storage of the mobile computer: 1) Launch Signature utility as described in Launch Signature Utility. Signature utility launches. 2) Tap icon on toolbar.
Page 218 Chapter 7 More Applications Preferences settings open showing Pen Width tabbed page. 3) Select between Pen Width, Pen Colors and Background Colors tabs to customize signing preferences. 4) Tap the “OK” command to quit setting saving change, or tap CANCEL label to quit setting without saving change.
Page 219 CP50 Mobile Computer Reference Manual...
Page 220: Manage Mobile Computer
Chapter 8 MANAGE MOBILE COMPUTER This chapter guides you to the system settings featured by the O.S. Access these settings to define how the mobile computer looks, sounds, stores/secures your data, manages the applications, or exchanges data with your networks or other devices. This chapter also includes a section detailing the mechanism you follow suit to update O.S.
Page 221: Update O.s. Image
O.S. image upgrage helps optimize the mobile computer’s performance and functionality. The upgrade relies on CipherLab’s OS Update Tool, a utility to run on your PC to get the job done. This utility brings the upgrades of O.S. image and splash (booting logo) to the mobile computer.
Page 222 FILENAME CIPHERLAB\FLASH.SIG Version : 0.80.65 * CipherLAB 0.80 Build 65 * Upgrade progresses 5) Restart the mobile computer. It takes longer than usual for the mobile computer to restart by the support of the new O.S. image (and/or splash image).
Page 223: Sd Card Auto Update
4) Select Enable SD Card Auto Update, and select the disk generated by your SD card. 5) Press Update button. CipherLab OS Update Tool proceeds to copy all the files required for your desired upgrades onto the SD card. Once copy finishes, the tool prompts “Copying file(s) is done successfully”.
Page 224 LENGTH : 67122163 FILENAME CIPHERLAB\FLASH.SIG Version : 1.0.19 * CipherLAB 1.00 Build 19 * Upgrade progresses 9) Before restarting the mobile computer, remove the SD card from the mobile computer, lest the mobile computer reboots to upgrade the O.S. image again.
Page 225: Sd Card Manual Update
8.1.3. SD CARD MANUAL UPDATE To manaul-upgrade O.S. image with a SD card: 1) Have an SD card. Let it mount your PC as a removable disk. 2) Run CipherLab OS Update Tool on your PC. CipherLab OS Update Tool opens. CipherLab...
Page 226 Chapter 8 Manage Mobile Computer 10) Restart the mobile computer. It takes longer than usual to restart the mobile computer by the support of the new O.S. image (and splash image). Right before the mobile computer boots into Today Screen, you are prompted to calibrate touchscreen.
Page 227: System Settings
CP50 Mobile Computer Reference Manual 8.2. SYSTEM SETTINGS This section guides to Windows Embedded Handheld 6.5 system settings. Access these settings to define how the mobile computer looks, sounds, stores/secures data, manages applications, or exchanges data with networks or other devices.
Page 228 Chapter 8 Manage Mobile Computer computer can be configured and their info can be viewed. SOUNDS & NOTIFICATIONS Configures the mobile computer’s phone ringtones, how the mobile computer vibrates, how a notification is received, how an alarm sounds, or how music or other media with audio plays, and related settings.
Page 229 CP50 Mobile Computer Reference Manual NOTIFICATIONS TABBED PAGE Configures the ring type for a number of system events such as incoming calls, established or disconnected connections and so on.
Page 230: Connections Folder
Chapter 8 Manage Mobile Computer 8.2.1. CONNECTIONS FOLDER This section guides to system settings’ Connections Folder. Open Start screen, tap Settings | Connections Connections folder opens: Connections folder Beam For Windows Mobile and Windows Embedded Handheld, “beam” is typically known as data sharing between handheld devices through an infrared wireless connection.
Page 231 CP50 Mobile Computer Reference Manual NETWORK CARDS It opens Wi-Fi settings that feature two tabs – Wireless and Network Adapters. WIRELESS TABBED PAGE Wi-Fi needs to be on before this page can deliver service. Turn on Wi-Fi by tapping the “Menu”...
Page 232 Chapter 8 Manage Mobile Computer Enables/disables the radios of Wi-Fi, Bluetooth, phone, and mobile data. It also limits mobile data to 2G only. See Use Only 2G Networks. Wireless Manager opens showing a few entries: All: Turns on/off all the radios on the mobile computer except GPS. (GPS is turned off by losing GPS-dependent applications).
Page 233 CP50 Mobile Computer Reference Manual Call Barring: Blocks certain types of incoming and outgoing calls. Caller ID: Sets if your phone number is displayed to whom you call. Call forwarding: Configures how to forward your calls when you’re on a phone already, you didn’t answer and so on.
Page 234 Chapter 8 Manage Mobile Computer Setting Description My ISP Sets up mobile data connection to the Internet. It provides links – modem connection and Manage existing connection. The latter is only available after a connection is set up. See also Edit &...
Page 235 CP50 Mobile Computer Reference Manual Advanced Featured settings are: tabbed page Setting Destription Select Networks Sets which network to auto use when accessing Internet or a private network. Dialing Rules… Sets where you are dialing from so you don’t have to create a new connection on a different location.
Page 236: Personal Folder
Chapter 8 Manage Mobile Computer 8.2.2. PERSONAL FOLDER This section guides to Personal Folder Open Start screen, tap Settings | Personal. Personal folder opens: Personal folder opens Owner Information Creates contact info about the owner of the mobile computer and also some notes. Phone Accesses phone settings.
Page 237: System Folder
CP50 Mobile Computer Reference Manual 8.2.3. SYSTEM FOLDER This section guides to System Folder Open Start screen, tap Settings |System. System folder opens: System folder opens Certificates Views or deletes the digital certificates used by some applications to access some secured networks.
Page 238 Chapter 8 Manage Mobile Computer Managed Programs Views the applications remotely installed by your domain’s system administrator. Memory Delivers how the internal/external memories are used. See also Check Storage. Remove Programs Views and removes the acquired (non-inherent) applications. See also Uninstall Application.
Page 239 CP50 Mobile Computer Reference Manual DEVICE INFORMATION Displays some mobile computer’s info such manufacturer, software/firmware version, memory capacity and so on. See also Check Storage. Here also displays the mobile computer’s Device Config, a sequence of paired digits, with each delivering a piece of information about the hardware integrated on the mobile computer.
Page 240 Chapter 8 Manage Mobile Computer EXTERNAL GPS Configures external GPS receiver in use by the mobile computer. Three tabs are featured – Access, Programs and Hardware. Tabbed Page Description Programs Sets the software port for GPS software and location-aware applications to stream GPS data.
Page 241 CP50 Mobile Computer Reference Manual...
Page 242: Specifications
Ordering Option - built-in module for GSM/HSPA+ Cinterion PH8 Data & Image Capture Digital Camera 5 mega-pixel CMOS type Laser (Symbol SE955 with CipherLab Barcode Reader Ordering options include decoder board) (Symbol SE4500-DL with PL4507 decoder board) HF RFID reader supports ISO14443A and B,...
Page 243: Electrical Characteristics
CP50 Mobile Computer Reference Manual ELECTRICAL CHARACTERISTICS Batteries Main Battery Pack Rechargeable Li-ion battery – 3.7 V, 3300 mAh Charging time: 4 hours Backup Battery Rechargeable Lithium battery – 25 mAh Data retention for 0.5 hours Charging time: 8 hours...
Page 244: Environmental Characteristics
IP 65 per applicable IEC sealing spec. Electrostatic Discharge ± 15 kV air discharge, ± 8 kV contact discharge Note: CipherLab doesn’t assume the responsibility for the mobile computer’s malfunction incurred by the operation outside operating temperature range. PROGRAMMING SUPPORT Development Environment &...
Page 245: Accessories
CP50 Mobile Computer Reference Manual ACCESSORIES Accessory Options Pistol Grip USB Cable Hand Strap Belt Holster with Shoulder Strap Protective Cover Charging & Communication Cradle with a spare battery Vehicle Mount Vehicle Charger...
Page 246: Scan Engine Settings
Appendix I SCAN ENGINE SETTINGS Utility Reader Configuration (ReaderConfigMobile.exe) configures these reader types: 1D Laser (SE955) 2D Imager (SE4500DL) RFID reader Reader combination allowed is either 1D+RFID or 2D+RFID. Each integration is able to initialize both readers at the same time (dual mode operation). For example, if you press a physical scan key, the mobile computer reads a printed barcode in position or an RFID tag in proximity depending on which one comes first.
Page 247: Symbologies Supported
CP50 Mobile Computer Reference Manual SYMBOLOGIES SUPPORTED Depending on the available scan engine(s), supported symbologies are different as listed below. For details on configuring associated settings, refer to Appendix II and III. Laser Codabar Code 11 Code 93 Composite Code...
Page 248 Appendix I Scan Engine Settings GS1 DataBar Expanded Stacked 2D Symbologies PDF417 MicroPDF417 Data Matrix Maxicode QR Code MicroQR Aztec...
Page 249: Rfid Tags Supported
CP50 Mobile Computer Reference Manual RFID TAGS SUPPORTED RFID reader supports both reading and writing RFID data. Supported labels include ISO 15693, ISO 14443A and ISO 14443B. The supported RFID tags: ID_MOD_MP_RFID UID Only Read Page Write Page ISO 14443A...
Page 250: Laser (Se955)
Appendix II LASER (SE955) The tables below list the symbologies settings for 1D laser scan engine (SE955). SYMBOLOGY SETTINGS Laser Engine Description Default Code 11 Enable Check digit verification Decide whether to verify check digits. If the check digit is Disable incorrect, the barcode will not be accepted.
Page 251 CP50 Mobile Computer Reference Manual Check digit verification Decide whether to verify the check digit. If desired, select Disable one of the algorithms below. If the check digit is incorrect, the barcode will not be accepted. Disable USS check digit...
Page 252 Appendix II Laser (SE955) Transmit check digit Decide whether to include the check digit in the data being transmitted. One or two fixed lengths Select Length 4~55 (min/max) Range (1~55) GS1 DataBar (RSS) GS1 DataBar-14 GS1 DataBar-14 is short for GS1 DataBar Omnidirectional. Enable This group consists of (1) GS1 DataBar Omnidirectional, (2) GS1 DataBar Truncated, (3) GS1 DataBar Stacked, and (4)
Page 253 CP50 Mobile Computer Reference Manual EAN security level Sets the security level to ensure decoding accuracy considering the printed quality of the barcodes such as Code 128, Code 93, and UPC/EAN. The higher the level is, the more security is ensured. Options are:...
Page 254: Miscellaneous
Appendix II Laser (SE955) UPC security level Sets the security level to ensure decoding accuracy considering the printed quality of the barcodes such as Code 128, Code 93, and UPC/EAN. The higher the level is, the more security is ensured. Options are: Level Description With this default, the scan engine is aggressive...
Page 255: Aim Code Id - Modifier Characters
CP50 Mobile Computer Reference Manual QR Code Industrial 25 (Discrete 25), IATA 2 of 5 Maxicode Code 39 Trioptic, Bookland EAN, US Postnet, US Planet, UK Postal, Japan Postal, Australian Postal, Dutch Postal AIM CODE ID – MODIFIER CHARACTERS Code Type...
Page 256 Appendix II Laser (SE955) GS1 DataBar (RSS) Always transmit 0. RSS-14 and RSS Limited will be transmitted with an Application Identifier “01”. example, RSS-14 barcode, 10012345678902, transmitted as ]e00110012345678902. Note: In GS1-128 emulation mode, RSS is transmitted using Code 128 rules (= “]C1”). EAN.UCC Native mode transmission Composites (RSS,...
Page 257 CP50 Mobile Computer Reference Manual ECC 200, FNC1 in first or fifth position. ECC 200, FNC1 in second or sixth position. ECC 200, ECI protocol implemented. ECC 200, FNC1 in first or fifth position, ECI protocol implemented. ECC 200, FNC1 in second or sixth position, ECI protocol implemented.
Page 258: Imager (Se4500Dl)
Appendix III 2D IMAGER (SE4500DL) The tables below list the symbology settings for 2D imager (SE4500DL). SYMBOLOGY SETTINGS 1D SYMBOLOGIES 2D Engine Description Default Codabar Enable CLSI editing When applied, the CLSI editing strips the start/stop characters and inserts a space after the first, fifth, and tenth characters of a 14-character Codabar barcode.
Page 259 CP50 Mobile Computer Reference Manual the reader must decode 10 times before transmitting its data to confirm that there is no additional ISBT barcode. ISBT Concatenation When “Auto-discriminate” applied, decide 10 times Redundancy concatenation redundancy (2~20 times). Industrial 25 (Discrete 25)
Page 260 Appendix III 2D Imager (SE4500DL) transmitted. "Check digit verification" must be enabled. Full ASCII conversion Code 39 Full ASCII includes all the alphanumeric and special Disable characters. One or two fixed lengths Select Length 4~55 Range (1~55) Intercharacter gap size The Code Codabar symbologies...
Page 261 CP50 Mobile Computer Reference Manual Convert GS1 Databar to "Convert to UPC/EAN" only applies to GS1 Databar-14 and UPC/EAN GS1 Databar Limited barcodes not decoded as part of a Composite barcode. Convert to EAN-13 Strip the leading "010" from barcodes.
Page 262 Appendix III 2D Imager (SE4500DL) for UPC-A. UCC coupon extended Read UPC-A barcodes starting with digit "5", EAN-13 code barcodes starting with digits "99", and UPC-A/GS1-128 Coupon Codes. UPC-A, EAN-13, and GS1-128 must be enabled first! Use “Addon Redundancy” to control auto-discrimination of the GS1-128 (right half) of a coupon code.
Page 263 CP50 Mobile Computer Reference Manual UPC Composite Mode UPC barcodes can be "linked" with a 2D barcode during Always transmission as if they were one barcode. Linked UPC Never Linked Transmit UPC barcodes regardless of whether a 2D barcode is detected.
Page 264: Symbologies
Appendix III 2D Imager (SE4500DL) 2D SYMBOLOGIES 2D Engine Description Default 2D Symbologies PDF417 Enable MicroPDF417 Disable MicroPDF417 Code 128 Transmit data from certain MicroPDF417 barcodes as if it Disable Emulation was encoded in Code 128 barcodes. Transmit Code Identifier Miscellaneous Options must be enabled first! When applied, the MicroPDF417 barcodes are transmitted...
Page 265 CP50 Mobile Computer Reference Manual Autodetect Decode both regular and inverse QR Code. MicroQR Enable Aztec Enable Aztec Inverse Decide whether to decode Aztec Inverse. Regular Only Regular Only Decode regular Aztec barcodes only. Inverse Only Decode inverse Aztec barcodes only.
Page 266: Miscellaneous
Appendix III 2D Imager (SE4500DL) MISCELLANEOUS 2D Engine Description Default Miscellaneous Options Transmit Code ID Decide whether to include AIM Code ID in the beginning of none character data. None AIM code ID character (Refer to AIM Code ID – Code Characters)
Page 267 CP50 Mobile Computer Reference Manual...
Page 268: Hf Rfid Reader
Appendix IV HF RFID READER HF RFID reader supports ISO14443A and B, 15693 and Secure Access Module (SAM). RFID TAG DEFAULT BLOCK Tag Type Standard Default Block/Page Mifare ISO 14443A SR176 ISO 14443B ICODE SLI ISO 15693 LRI512 ISO 15693 SRF55VxxP ISO 15693 EM4135...
Page 269 CP50 Mobile Computer Reference Manual...
Page 270: Physical Keypad Reference Table
Appendix V PHYSICAL KEYPAD REFERENCE TABLE NUMERIC KEYPAD Numeric keypad layout: USE ALPHA (α), SHIFT ( ) & FN KEYS [α] keystroke [α] keystroke [Fn] keystroke beforehand beforehand keystrokes beforehand beforehand a blank space a blank space pqrs PQRS & wxyz WXYZ null...
Page 271 CP50 Mobile Computer Reference Manual...
Page 272: Qwerty Keypad
Appendix V Physical Keypad Reference Table QWERTY KEYPAD QWERTY keypad layout: USE ALPHA (Α), SHIFT ( ) & FN KEYS keystroke keystrokes [α] keystroke [Fn] keystroke beforehand twice beforehand beforehand beforehand < >...
Page 273 CP50 Mobile Computer Reference Manual “ & & & UNGLAUBE GmbH An der Moosach 3a D-85376 Massenhausen Tel: +49 8165 9558-0 kontakt@unglaube.de www.unglaube.de...

CipherLab CP50 Manual Manual

Release Notes

Introduction

Use Mobile Computer

Chapter 1

Data Capture

Camera

Chapter 3

Operating System

Chapter 4

Radios

Chapter 5

Phone

Chapter 6

More Applications

Chapter 7

Manage Mobile Computer

Specifications

Scan Engine Settings

Laser (Se955)

Imager (Se4500Dl)

Hf Rfid Reader

Physical Keypad Reference Table

Quick Links

Related Manuals for CipherLab CP50

Summary of Contents for CipherLab CP50