CipherLab CP60 Reference Manual page 45

TEXT INPUT
To enter text using QWERTY keypad:
Literal Input
1)
The QWERTY keypad enters lowercase letters a-z by default when neither
nor Shift key
To enter a letter in uppercase, press Shift key
To continuously type in uppercase, press Shift key
2) Press keys to enter text as desired.
Numeric or symbols Input
1)
To enter a single number/symbol, press
Bar.
To enter multiple numbers/symbols, press
Press a key engraved with blue-color character to enter number(s) and symbol(s)
2)
as desired.
Note there are cases when a typed letter is capitalized automatically:
The letter follows a period mark and a blank space (because it is seen as the start of a
new sentence).
The letter is typed after a paragraph break (because it is seen as the start of a new
paragraph).
CHANGE INPUT TEXT SIZE
Set the size to show typed text:
1) On Start screen, tap Settings | System | Screen | Text Size.
2) Tap Text Size tab.
3) Adjust the text size by moving the slider.
4) Tap the "OK" command on the softkey bar to apply the change and quit setting.
is pressed.
Chapter 1 Use Mobile Computer
so appears on the
twice to trigger
key once so appears on the
key twice to trigger
key
Title Bar.
mode.
Title
mode.
31