Barcode Reader; Launch Reader Configuration - CipherLab CP60 Reference Manual

CP60 Mobile Computer (WEH)

2.1. BARCODE READER

The mobile computer is capable of reading printed barcodes. The reader module can be a
either a (laser) 1D reader or a 2D imager. The mobile computer is installed with a CipherLab
utility Reader Configuration to configure the scan engine built inside. Use it to create a
profile of settings that best suits your needs.

2.1.1. LAUNCH READER CONFIGURATION

To launch Reader Configuration:
1) Tap Start Screen | Settings | System | Reader Configuration
Reader Configuration launches in context with the reader module(s) on board the
mobile computer. On the main settings page are three sections: General Settings,
Symbology and Miscellaneous.
Click to open
Start Screen
The following will guide to settings provided in each of the three sections.
66
Reference Manual
.
Reader Config opens
showing a main menu
with three sections
Click to open option
menu
Click to exit the
application
Click to open onscreen
keyboard