CipherLab CP60 Reference Manual page 289

Convert to UPC/EAN
INVERSE
Inverse
Enable Inverse
KOREAN 3 OF 5
Korean 3 of 5
Enable Korean 3 of 5
MSI
MSI
MSI
Length option
Check Digit Option
Transmit Check Digit
Algorithm
POSTAL CODE
Australian Postal
Enable Australian
Postal
Japan Postal
Enable Japan Postal
This only applies to GS1 DataBar-14 and GS1 DataBar
Limited barcodes not decoded as part of a Composite
barcode.
Convert to EAN-13
Strips the leading "010" from barcodes.
The barcode must be composed of a leading "01" as
the application identifier (AI) and a first digit of zero.
Convert to UPC-A
Strips the leading "0100" from barcodes.
The barcode must be composed of a leading "01" as
the application identifier (AI) and two or more zeros
(but not six zeros).
Checkbox to enable Inverse 1D decoding.
Checkbox to enable Korean 3 of 5 decoding.
Checkbox to enable MSI decoding.
Sets the length of the MSI symbols to decode.
One Fixed length (Length 1)
Two Fixed lengths (Length 1>Length 2)
Max / Min Length (range: 0-55; Length 1<Length 2)
Any Length
One check digit is mandatory for decoding MSI barcodes.
Select whether a second check digit should be verified. If the
check digits are incorrect, the barcode will not be accepted.
One Check Digit
Two Check Digits
Decide whether to include the check digit in the data being
transmitted.
When two check digits are set for verification, two choices
are available for the pair of check digits.
Modulo10 / Modulo11
Double Modulo 10
Checkbox to enable Australian Postal decoding.
Checkbox to enable Japan Postal decoding.
Appendix III 2D Imager (SE4500DL)
Disable
Disable
Disable
Enable
Max / Min
Length
(4-55)
One Check
Digit
Disable
Double
Modulo 10
Enable
Enable
275