Laser (Se955 & Se965Hp); Symbology Settings - CipherLab CP60 Reference Manual

LASER (SE955 & SE965HP)
The tables below list the symbology settings for 1D laser scan engine (SE955) and 1D long
range laser scan engine (SE965HP).

SYMBOLOGY SETTINGS

Symbology
CODABAR
CodaBar
Codabar
Length option
CLSI
NOTIS
CODE 11
Code 11
Code 11
Check Digit Option
Transmit Check Digit
Length option
CODE 39
Description
Checkbox to enable Codabar decoding.
Sets the length of the Codabar symbols to decode.
One Fixed length (Length 1)
Two Fixed lengths (Length 1>Length 2)
Max / Min Length (range: 0-55; Length 1<Length 2)
Any Length
When applied, the CLSI editing strips the start/stop
characters and inserts a space after the first, fifth, and tenth
characters of a 14-character Codabar barcode.
The 14-character barcode length does not include
start/stop characters.
Sets whether to include start/stop characters in the
transmitted data.
NOTIS Editing is to strip the start/stop characters, i.e. to
disable "Transmit Start/Stop Characters".
Checkbox to enable Code 11 decoding.
Sets whether to verify check digits according to the selected
option. If the check digits are incorrect, the barcode will not
be accepted.
Disable
One Check Digit
Two Check Digits
Selects whether to include check digits in the transmitted
data.
Check Digit Option" must be enabled.
Sets the length of the Code 11 symbols to decode.
One Fixed length (Length 1)
Two Fixed lengths (Length 1>Length 2)
Max / Min Length (range: 0-55; Length 1<Length 2)
Any Length
Appendix II
Default
Enable
Max / Min
Length
(4-55)
Disable
Disable
Enable
Disable
Disable
Max / Min
Length
(4-55)
261