CipherLab CP60 Reference Manual page 86

CP60 Mobile Computer (WEH)
HOW TO OUTPUT
After the output destination is set, configure how to output decoded data, i.e. the "format"
to present decoded data.
Setting
Auto Enter
Auto Enter character
Display Code Type
Show Code Length
Prefix
Suffix
Field Delimiter
ENABLE READER
Features a checkbox to enable or disable reader scanning ability. When enabled, light beam
will be sent out each time the trigger (scan key) is pressed.
72
Description
Adds an ENTER character before or after each scanning act.
This function saves the trouble pressing [Enter] key to
confirm each scan. Options are:
Disable
Decoded data + Enter
Enter + Decoded data
Adds a key code before or after the decoded data. This
setting is available only when [Auto Enter] is enabled.
Options are:
None
Carriage Return
Tab
Space
Comma
Semicolon
Prefixes the output data with code type information.
Suffixes the output data with code length information.
Affixes 0 to 10 characters to the left of the output data. Tap
the keyboard icon
character table for entering the prefix.
Prefixes containing invisible characters are supported.
Affixes 0 to 10 characters to the right of the output data. Tap
the keyboard icon
character table for entering the suffix.
Suffixes containing invisible characters are supported.
Sets the delimiter to separate the output barcode data to the
following pieces: code type, decoded barcode data, and code
length (if applicable). Options are:
Comma
Semicolon
Full stop
next to the input field to open a
next to the input field to open a
Reference Manual
Default
Decoded
data +
Enter
Carriage
Return
Deselected
(Disabled)
Deselected
(Disabled)
--
--
Comma