Use Wi-Fi; Launch Scu - CipherLab CP60 Reference Manual

CP60 Mobile Computer (WEH)

5.2. USE WI-FI

The mobile computer is capable of Wi-Fi, a wireless networking technology making use of an
access point, also known as "hotspot", to connect to a wireless local area network.
To use Wi-Fi, the mobile computer has to connect to a hotspot. Some hotspots are open for
connection while others request a key to authenticate access. If this is the case, the
authentication key must be included in the mobile computer's Wi-Fi settings.
For authentications based on secure certificates, see
Wi-Fi settings and power are controlled via Summit Client Utility (SCU). Windows Zero
Configuration (Wireless Manager) can only be used to view Wi-Fi power and connection
status.
Turn off Wi-Fi when it isn't used to extend battery life. See
Summit Client Utility functions by the use of Wi-Fi profiles. Profiles are a set of radio and
security settings that are stored in the registry. You may create, rename, edit and delete
profiles, as well as alter global settings that apply to every profile or to Summit Client Utility
(SCU) itself. For more details on profile settings, please visit the following websites:
http://www.summitdata.com/documentation.html
http://www.summitdata.com/Documents/summit_users_guide_3_03.html
http://www.summitdata.com/Documents/summit_quick_start_v3_03.html

5.2.1. LAUNCH SCU

Wi-Fi settings can be adjusted with Summit Client Utility. Within this application are three
tabbed pages which allow users to select the access point for connection, create profiles for
better management, perform diagnostics on connectivity, and fine-tune property settings
to meet their individual requirements.
To launch SCU:
1) On Start screen, tap Settings | System | SCU
SCU opens showing three tabbed pages: Status, Configuration, and Diagnostics.
The following sections explicate in detail the settings on each of these pages.
146
Install Secure Certificates.
Turn On/Off Wi-Fi
.
Reference Manual
Power.