Scan Engine Settings; Symbologies Supported - CipherLab 9300 Reference Manual

SCAN ENGINE SETTINGS

The Reader Configuration Utility (ReaderConfig.exe) allows configuring the following
reader types, depending on the module equipped on your mobile computer:
1D Laser (SE955)
2D Imager
Note: (1) You cannot have 1D+2D scan engines installed on the mobile computer
because they are both barcode readers!
(2) You can run only one utility or application at a time to control the reader. For
example, while running ReaderConfig.exe, you should not run FORGE Application
Generator, STREAM Wireless Studio, MIRROR Browser, or any other application
that uses ReaderDLL.

SYMBOLOGIES SUPPORTED

Varying by the scan engine installed, the supported symbologies are listed below. For
details on configuring associated settings, please refer to each Appendix separately.
Codabar
Code 11
Code 93
Composite Code
MSI
Postal Codes
Code 128
Code 2 of 5
Code 3 of 9
Code 128
GS1-128 (EAN-128)
ISBT 128
Industrial 25 (Discrete 25)
Interleaved 25
Matrix 25
Chinese 25
Code 39
Trioptic Code 39
Italian Pharmacode (Code 32)
Appendix I
Laser 2D
123