CP60 Mobile Computer (WEH)
If the device to pair with is not displayed, make sure it is currently set as discoverable.
If the mobile computer stops scanning before that device becomes discoverable, tap
Refresh to repeat the scan
4) Tap the name of the found device that you wish to connect. Tap Next.
The two devices pair with each other. You may be asked for a passcode for a secure
connection. Try entering "0000" or '1234" (the most common passcodes). On some
occasions you may need to refer to the documentation of the Bluetooth device to obtain
this code.
Once the device is paired (and connected), you are prompted by a dialog indicating that
the connection is established.
5) Tap Done on the softkey bar.
OR
Tap the Advanced command on the
softkey bar to configure the Bluetooth
features to use with that device. Then tap
Save.
174
Bluetooth device paired and
connected
Reference Manual