Release Notes - CipherLab CP60 Reference Manual

RELEASE NOTES

Version Date
1.03 Aug 22, 2014
1.02 Feb 5, 2014
1.01 Aug 16, 2013
1.00 Feb 08, 2013
Notes
Replace Declaration of Conformity
Add CP60R, CP60GR Mobile Computer in 1.1.1 Overview
Add battery setup for CP60R/CP60GR Mobile Computer in 1.4.1 Main
Battery Setup
Revise chapter structure: 2.1 Barcode Reader
Add Field Delimiter in 2.1.1 Launch Reader Configuration – General
Settings - Data Output
Add 2.2 HF RFID Reader
Add HF RFID Reader in Specifications
Add supported RFID tag list in Appendix I
Add Appendix IV HF RFID Reader
Modify notes for swapping main battery in 1.2.1 Power Menu, 1.4.1
Main Battery Setup, and 1.4.2 Charge Batteries - Replace Main
Battery Pack
Update 2D Imager Settings in 2.1.2 General Settings – Scanner
Preferences
Update Safety Notice
Add IP67
Update accessories
Replace QWERTY keypad picture
Update screen resolution: delete QVGA
Update drop specification
Revise SE4500 to SE4500DL
Revise description for 1.3. Scanning good read LED, speaker and
vibrator
Supports entering invisible characters as prefix & suffix of decoded
data under 2.1.2 General Settings - Data Output
Add Reader Config Notification Settings under 2.1.2 General
Settings
Add Picklist Mode under 2.1.4 Reader Config settings page (2D
imager)
Revise 1.6.2 Screen Rotation & 1.6.3 Backlight Setting UI
Add warning message for Camera/2D Reader in Chapter 3
Revise 5.2 Use Wi-Fi UI and settings
Revise 7.3 Signature Utility icon
Add 7.4 Push to Talk
Add note for RTC time retention in 8.2 System
Add 8.2.3 System Folder - USB Connection
Add "Data only" in WWAN specifications
Update IEC specs for tumbling test and ESD description
Add SE965HP in Appendix I & II
Add Transmit Check Digit under Appendix II EAN-13 barcode
settings
Initial release