CipherLab CP60 Reference Manual page 171

Encryption This specifies the type of key used to encrypt and decrypt
transmitted data, and how that key is specified or derived.
Select Encryption type in the Value drop-down box.
Item
None
TKIP
AES-CCMP
WEP
CKIP
Authentication This is the protocol used to authenticate the device and its
user if the WLAN uses the Enterprise version of Wi-Fi
Protected Access (WPA) and WPA2. Select Authentication
type in the Value drop-down box, then enter the
credentials necessary for each type in the appeared fields.
Item
None
LEAP
EAP-FAST
PEAP-MSCHAP
Description
N/A
The encryption method defined with WPA.
TKIP uses RC4 encryption as does WEP.
The encryption method defined with IEEE
802.11i and certified
AES-CCMP is stronger than RC4
The encryption method defined with the
original IEEE 802.11 standards; encrypts
transmitted data using 64-bit or 128-bit
encryption.
CKIP is supported for use only with static
WEP. For CKIP, encryption keys need to
be defined in SCU;
encryption keys are derived dynamically
from an EAP authentication.
Description
N/A
Credentials values for LEAP:
User Name (up to 64 characters)
Password (up to 32 characters)
Credentials values for EAP-FAST
User Name (up to 64 characters)
Password (up to 32 characters)
PAC Filename (up to 32
characters): You may create a
protected access credential (PAC)
for each client device. When
creating a PAC manually, you must
store it in the directory identified in
Certs Path on the Globals settings
page. To use automatic
provisioning, leave this field blank.
PAC Password (up to 32 characters)
Credentials values for PEAP-MSCHAP,
PEAP-GTC, EAP-TTLS:
User Name (up to 64 characters)
Chapter 5 Radios
with WPA2.
for CKIP-EAP,
157