Auth Server
TTLS Inner Method
PMK Caching
TX Diversity
RX Diversity
Frag Thresh
RTS Thresh
LED
Tray Icon
Type of authentication server being used for EAP authentication.
Value:
Type 1
Type 2
Default: Type 1
Authentication method used within secure tunnel created by EAP-TTLS.
Value:
Auto-EAP
MSCHAPV2
MSCHAP
PAP
CHAP
EAP-MSCHAPV2
Default: Auto-EAP
The type of Pairwise Master Key (PMK) caching to use with a WPA2
encryption type (alternative to WPA2 CCKM).
Value: Standard or OPMK (opportunistic PMK)
Default: Standard
How to handle antenna diversity when transmitting data to AP.
Value:
Main Only
Aux Only
On
Default: On
How to handle antenna diversity when receiving data from AP.
Default: On-start on Main
This is a fixed setting; on startup, the main antenna is always used
When packet size exceeds the set threshold, it becomes fragmented.
Value: 256 ~ 2346
Default: 2346 (bytes)
When packet size exceeds the set threshold, RTS/CTS is required on link.
Value: 0 ~ 2347
Default: 2347 (bytes)
Indicates whether or not an LED is used.
Value: On, Off
Default: Off
Whether to enable the system tray icon or not.
Value: On, Off
Default: On
Cisco Secure ACS or another server that uses
PEAPv1
for
PEAP
(PEAP-MSCHAP)
A different authentication server, such as
Juniper Networks Steel Belted RADIUS, that
uses PEAPv0 for PEAP-MSCHAP
Any available EAP method
Use main antenna only
Use auxiliary antenna only
Use diversity
Chapter 5 Radios
with
EAP-MSCHAPV2
161