General Settings - CipherLab CP60 Reference Manual

2.2.3. GENERAL SETTINGS

General Settings can set the data output format, notification of successful reading/writing
of RFID tags, and check or change ISO14443A Key A and Key B values. The following items
are available.
Enable RFID Reader (Enabled by default)
Data Output
Notification Settings
ISO14443A Login Key
ISO14443A Change Key
Note: Since it is possible to read barcode data and RFID data at the same time, it is
recommended that only one scan engine is enabled at a time to prevent interference.
Enable/disable the 1D or 2D reader as described in
DATA OUTPUT
Data Output chooses a location to export the decoded data, and the output format.
To open Data Output settings page:
1) Launch the RFID reader as described in
2) Tap the green arrow next to Data Output.
Launch Reader
Launch HF RFID Configuration.
Chapter 2 Data Capture
Configuration.
87