CipherLab CP60 Reference Manual page 83

1D (LASER) READER SETTINGS
Setting
Decode Timeout
Redundancy Level
Scan Angle
Scan Mode
Timeout Between Symbols
Description
Sets the maximum time for the decoding process during a
scan. Configurable between 1 sec to 9 sec.
Sets how many successful readings should be done before
linear barcodes such as Codabar, MSI, and Interleaved 2
of 5 can be decoded. Levels 1 to 4 available.
The readings needed for each level are as follows:
Level Description
Level 1 The following
successfully
decoded: Codabar, MSI, Industrial 25
(Discrete 25), Interleaved 25.
Level 2 All barcodes must be successfully read
twice before being decoded.
Level 3 All barcodes must be successfully read
twice before being decoded, except for the
following which must be read three times:
MSI,
Interleaved 25.
Level 4 All barcodes must be successfully read
three times before being decoded.
Sets the scan angle for laser scan engine. Options to
choose between are Wide Angle and Narrow Angle.
Sets the reader's scanning behaviour. Options available
are Continuous and Laser modes.
Sets the time for the barcode reader to resurrect its ability
to once more decode a barcode it just decoded.
Only applied in Continuous mode.
barcodes
read twice before
Industrial 25 (Discrete
Chapter 2 Data Capture
Default
3 sec
Level 1
must be
being
25),
Wide
Angle
Laser
1 sec
69