Mxd-1901-Pan Installation Dimensions - AMX Modero X Series G5 MXT-2001-PAN Instruction Manual

Installing Wall-Mount (MXD) Panels

MXD-1901-PAN Installation Dimensions

FIG. 28 and FIG. 29 provide installation dimensions for the MXD-1901-PAN:
FIG. 28 MXD-1901-PAN-L Installation Dimensions (front view)
FIG. 29 MXD-1901-PAN-L Installation Dimensions (side view)
Since the cutout for the Backbox is off-center from the edges of the touch panel, use the included Installation Template to
ensure proper placement.
Using the Installation Template to select the final placement of the Backbox is highly
recommended. The outside edges of the template are the same dimensions as the
touch panel, which allows you to troubleshoot possible conflicts with wall edges,
doors, and other potential obstacles.


1.
Prepare the area by removing any screws or nails from the drywall before beginning the cutout process.
2.
After ensuring proper placement, cut out the mounting surface for the Backbox, using the included Installation
Template as a guide.
Making sure that the actual cutout opening is slightly smaller than the provided
dimensions is highly recommended. This action provides the installer with a margin
for error if the opening needs to be expanded. Too little wall material removed is
always better than too much.
38
The MXD-2001-PAN uses Installation Template 68-5968-01
The MXD-1901-PAN uses Installation Template 68-5968-02
Notes:
- Dimensions in parenthesis are in millimeters.
- These drawings show a Landscape panel. The dimensions
are the same for Portrait panels, except for the vertical orientation.
Additional detailed installation and product drawings (for both
Landscape and Portrait panels) are available to view/download
at www.amx.com
Modero X® Series G5 Touch Panels Instruction Manual