AMX Modero X Series G5 MXT-2001-PAN Instruction Manual page 57

b.
Attach the Ethernet cable and gently push the connection back under the cover.
Refer to the Power via PoE section on page 52 for details on PoE and Ethernet Cable
Installation and Modification.
8.
Test the incoming wiring by attaching the panel connections to their terminal locations and applying power. Verify
that the panel is receiving power and functioning properly to prevent repetition of the installation.
Do not disconnect the connectors from the touch panel. The unit must be installed
with the attached connectors before being inserted into the mounting surface.
9.
Latch the panel onto the hooks on the Backbox. Push in on the bottom snaps (Landscape) or on the right (Portrait)
gently but firmly until the snaps "click" to lock it down (FIG. 45)..
Mounting Surface
FIG. 45 Installing the MXD-1001 / MXD-701
If a gap is observed between the panel and the Backbox, or feel any binding while
locking down the panel, stop immediately and verify that no cables or other items are
in the way. Do not force the panel into position, as this can cause damage to the
touch screen or the panel electronics.
10.
Reconnect the terminal Ethernet and USB cables to their respective ports.
Modero X® Series G5 Touch Panels Instruction Manual
Backbox
Snaps
Installing Wall-Mount (MXD) Panels
Latch Hooks
51