Mxd-1901-Pan Installation; Installing The Mxd-1901-Pan Into A Wall - AMX D-1901-PAN Operation/Reference Manual

Installation

MXD-1901-PAN Installation

The MXD-1901-PAN may be installed directly into a solid surface environment, using either solid surface screws or the
included locking tabs for different mounting options. Once installed, the MXD-1901-PAN is contained within a clear
outer housing known as the back box. This back box is removed when installing the device into a wall or when using the
optional Rough-In Box accessory (FG039-15).
FIG. 12
MXD-1901-PAN Back Box

Installing the MXD-1901-PAN into a wall

The MXD-1901-PAN comes with a clear plastic backbox (FIG. 12) designed to attach the panel to most standard wall
materials. This backbox has four locking tabs (two on top and two on bottom) to help lock the backbox to the wall. These
locking tabs are only extended AFTER the backbox is inserted into the wall. The backbox also has four slots for
accepting the temporary mounting posts mounted on the back of the device (FIG. 13 and FIG. 14).
When installing the backbox, make sure that the assembly is in the correct position
and in the correct place. Once the locking tabs are extended and locked into place,
removing the backbox may be difficult without having access to the back of the wall
or causing damage to the wall.
FIG. 13 Side view of installed MXD-1901-PAN (Landscape)
14
Temporary Mounting Posts
Temporary Mounting Posts
Wall
MXD-1901-PAN
(front)
Locking Tabs
Locking Tabs
Back Box
Temporary Mounting Posts
Back box knockouts
MXD/T-1901-PAN 19.4" Modero X Series® G5 Touch Panels