Mxd-1000 Installation; Installing The Mxd-1000 Into A Wall - AMX MXTD-1000 Instruction Manual

MXT/D-1000 - 10.1" X Series Panels

MXD-1000 Installation

Detailed specifications drawings for the
Refer to A Note About Wall and Rack Installation on page 5 for important notes
on thermal concerns with Rack and Wall installations.
The MXD-1000 may be installed directly into a solid surface environment, using either solid surface screws or the
included locking tabs for different mounting options.
Once installed, the MXD-1000 is contained within a clear outer housing known as the Backbox (FIG. 13). This Backbox
is removed to install the device into a wall or when using the optional Rough-In Box accessory (FG039-17).
FIG. 13 MXD-1000 Backbox (Landscape orientation)
For typical mounting surfaces, such as drywall, use the locking tabs as the primary
method for securing the Backbox to the surface. For thin walls or solid surfaces, use
mounting screws (not included).

Installing the MXD-1000 into a Wall

The MXD-1000 comes with a clear plastic Backbox (designed to attach the panel to most standard wall materials. The
Backbox has four locking tabs (two on top and two on bottom) to help lock the Backbox to the wall (see FIG. 13).
These locking tabs are only extended AFTER the Backbox is inserted into the wall. (FIG. 14 and FIG. 15).
When installing the Backbox, make sure that the assembly is in the correct position
and in the correct place. Once the locking tabs are extended and locked into place,
removing the Backbox may be difficult without having access to the back of the wall
or causing damage to the wall.
16
MXD-1000 are available to download from www.amx.com.
Locking tabs
Locking tabs
MXD/T-1000, MXD/T-700 and MXD-430 Modero X Series® Touch Panels