Installing Previous Firmware; Installing New Firmware From An External Usb Stick - AMX Modero X Series G5 MXT-2001-PAN Instruction Manual

Upgrading Firmware

Installing Previous Firmware

In certain circumstances, it may be necessary to revert to a previously installed version of the touch panel firmware.To
reset the touch panel to its previously installed firmware via the Settings menu:
1.
From the Firmware Update window, select Revert to Previous Firmware Version (see FIG. 54 on page 59). If no
previous version is available, this field is disabled.
2.
A System Message window appears, asking "Are you sure you want to install the following firmware?", with the
previous firmware version listed below (FIG. 56):
FIG. 56
Revert to Previous Firmware Version window
3.
Select Yes to install the previous firmware version and No to return to the Install Firmware page.
4.
If you choose Yes, the touch panel will reboot and restart with the previously installed firmware.

Installing New Firmware From an External USB Stick

To install new firmware to the touch panel from an external disk via the Settings menu:
1.
Download the latest Modero X Series G5 touch panel firmware from www.amx.com and save it to a USB stick or
other external drive with USB capability.
The firmware can be saved at the root directory, or be saved in a folder in the USB
stick directory.The folder name is not case sensitive.
2.
Insert the USB stick into an available USB port. This may require disassembling wall-mounted touch panels to
access the USB ports if a USB extension was not already installed.
3.
From the Firmware Update window, select Install Firmware from USB to open the KIT File Browser window
(FIG. 57).
60 Modero X® Series G5 Touch Panels Instruction Manual