Xircom POCKET ETHERNET ADAPTER III User Manual page 85

PACKET DRIVER PARAMETERS
Packet driver parameters must be stated on the command line with the
PE3PD.COM packet driver.
See the alphabetical listing of network operating systems in the Software
Setup and Instalkalion
section to determine whether your network uses a
packet driver.
The packet driver supplied on the Xircom Network Drivers diskette
is
based on
F I P
Software's public domain specification. The driver file
PE3PD.COM
is
located in the \PKTDRV directory on the Drivers diskette.
Refer to your network documentation for instructions on how to
i n s t a l l
the packet driver with your network Most installations should be able to
use the default
settings
listed below. To change the default
settings,
use
the appropriate keywords and settings on the PE3PD.COM command line
when loading the packet driver.
The Xircom packet driver PE3PD.COM is self-configuring and therefore
finds
its
own LPT and interrupt values and correctly selects bidirectional
or non-bidirectional mode under most drcumstan ces. Should it be
necessary to ovemde the self-configured parameters, use the following
command line options (keywords are not
case sensitive):
K e Y w d Dehllt
valid-gs
?
"
AUTO
S m =
60 (60-80)
LPT=
AUTO
(1 t o 3 )
m=
AUTO
(3 t o 15)
IOADDRESS=
AUTO
(240 t o 380)
LINKDISABLE LINK
INTEGRITY
ENABLED
74