Xircom POCKET ETHERNET ADAPTER III User Manual page 37

5. Use
an ASCII text editor to edit your PROTOCOL.INI file:
Add the following fragment to the ADAPTERS section:
;XIRCOM AMPTER
[
XIRCOMNBT]
DRTVERNAME
=
XIRCOM$
In the PROTOCOLS section of the PROTOC0L.INI file, replace all
references to the 3COm 32503 binding "ETI-IERUNKII" with
m c o m .
For example, in the definition
;XNS protocol
[ XNS-l"SPORT]
DRIVERNAME
=
XNSTP$
BINDINGS
=
ETHKRtINKII
the statement
BINDINGS
=
ETHERLINKII
should be changed to
BINDINGS
=
XIRCOMNET
6.
Save the file and reboot the PC.
3Cm 3+open venklls
la for
OS/2 (NDIS
driver)
1. Install your 3+0pen workstation software according to the
manufacturer's instructions, selecting the EtherLink
II
3C503
adapter. After completing the installation and before rebooting
your
system,
continue with the following instructions,
Xircom Network Drivers diskette to the directory
\3OPEN\OS2WKSTA\LANMAN\DRlVERS on your
hard disk
or
boot diskette.
3.
Using an ASCII text editor, replace the reference to the EtherLink
2.
Copy the file PE3NDIS.OS2 from the \NDIS directory on the
26