Xircom POCKET ETHERNET ADAPTER III User Manual page 80

necessary to ovemde the self-configured values, any combination of the
following command options can be used:
Keyword Dedkult Validsettings
?
Ncm
AUTO
LPT= AUTO (1 to
3 )
m=
AUTO
( 3 to 15)
IOADMZESS= AUTO
(0x240 to 0x380)
LINKDISABLE LINK
INTEGRITY
ENABLED
where
?
displays a summary of command options.
NON forces the driver into non-bidirectional mode. Without the "NON"
keyword, the driver autoconfigures to bidirectional or non-bidirectional
mode.
LPT= requires a number from
1
to 3 which designates the physical
parallel port to which the Adapter
is
connected: LPT1, LF' T 2, or
LFT3.
Default (if parameter not specified) is autoconfiguration.
I " = requires a number designating the parallel port hardware interrupt
(for example, INT=5 or INT=7). Default (if parameter not specified)
is
autoconfiguration.
IOADDRFSS= requires an I/O address in hexadecimal notation (0x240 to
0x380). Default (if parameter not specified)
is
autoconfiguration.
LlNKDISABLE disables l i n k integrity for operation with non-1OBASE-T
networks such as S t a r M 10. Without the "KDISABLE" keyword in
the PE3DLL command line, the driver defaults to link integrity ENABLED.
Insmctions for loading the appropriate DECnet-DOS and
PCSA
files and
drivers are provided in the Software Setup
and Installation section listing
network operating systems in alphabetical order by vendor.
69