Banyan Vines Dos Workstotion - Xircom POCKET ETHERNET ADAPTER III User Manual

BANYAN VINES DOS WORKSTATION (VERSIONS 4.X AND LATER)
NDIS DRIVER
1.
Create a Banyan directory on your workstation
hard
disk or VINES
boot diskette. For example:
c:>m
\VINES
2. At the DOS prompt, copy the files PE3NDIS.EXE and
PROTOC0L.INI from the \NDIS directory on the Xircom Net-
work Drivers diskette to the \VINES directory just created.
3. Copy the files from the VINES Master diskette into the \VINES
directory.
4. Copy the NDIS driver files from \NDIS directory on the VINES
LAN Drivers diskette into the \VINES directory.
5.
Using an ASCII text editor, edit the CONFIG.SYS file to include
the following lines:
DEVICE=C:\VINES\PRO".DOS /I:C:\VINES
DEVICE=C:\VINES\PE3NDIS.EXE
6.
change to the \VINES directory.
7.
Type PCCONFIG and select Network Card Settings, followed
by
NDIS Ethemet.
8. Select interrupt level 7 if your Xircom Pocket Ethemet Adapter Ill
is
using LPTl or LPT3, or interrupt level
5 if
the Adapter
is
using
LPT2.
9.
At
the PROTOCOL.INI bindings prompt type XIRCOMNET.
10. Press F10 to save and Esc to return to the
main
menu.
11.
Select Login Environment
Settings,
followed by Default
Communi-
cations Driver, followed by NDIS Ethernet.
12. Press Esc to return to the Main Menu and press F10 to save.
13. Reboot the PC.
Refer to your Banyan VINES documentation for additional information.
31