Ibm Os/2 Lan Sewer Version 2.0 - Xircom POCKET ETHERNET ADAPTER III User Manual

5. Change
to the \IBMCOM
directory.
6.
Use an ASCII text editor
to open and edit the PROTOC0L.INI file
as follows:
In the [IBMLXCFGI section, add the line
PE30S2V2-df
=
PE30S2M .NIF
In the LANDD-nifI section, modify the BINDINGS statement so
that it reads
BINDINGS
=
PE30S2V2-df
At
the end of the PROTOC0L.INI file, add the following lines:
[
PE3OS2V2-df
]
DriverName =
XIRCoW$
7. Save the file and reboot the PC.
I B M OS/2 LAN SERVER VERSION 2.0
IAN
Recpester
lnstdlatkn
(for
I B M OS/2 LAN
Server version
2.0)
NDlS Driver
1. Follow the instructions in your
OS/2
documentation for an
Advanced
LAN
Requester installation.
2. When installing and configuring the Requester component, under
Select Requester Services, choose "Neither of the above" for
messaging
services,
unless you h o w you need them and have the
information requrred for configuring these services.
3.
When you reach the Configure window, select LAN Adapter and
Protocol Support, then under the Options window choose Copy
additional network adapter drivers.
4.
On the Copy Additional Network Drivers window, type in the
path A\NDIS, then insert the Xircom Network Drivers diskette in
drive A and follow the prompts.
5. When the Options window
is displayed again, select Configure
Workstation and choose the Xircom Pocket Ethernet Adapter III
with IBM OS/2 NETBIOS protocol.