Xircom POCKET ETHERNET ADAPTER III User Manual page 70

Wdkngbng
PdWay OD1
ImtaAatkn
1.
Install Pathway Access for
DOS
Kernel and Drivers programs
according to the instructions in the Pathway Access for DOS
manual. Before rebooting the PC, perform the following steps.
2. Copy the following files from the \OD1 directory on the Xircom
Network Drivers diskette to the \PATHWAY directory on your
hard
disk or boot diskette:
LSL
.
COM
PE30DI. COM
IPXODI
.
COM
NBTx.ExE
NET.cFG
Foradditkdpmmekrsthat
mOD1
driver, telertodppedk
3.
Change to the \PATHWAY directory and load the drivers in the
following order:
LSL
PE30DI
IPXODI
(only if using Novell NetWare)
" I t
(only if using Novell NetWare)
4.
Load the Wollongong file 0DI.EXE.
5. Continue with the instructions in the Pathway Access for DOS
6.
Reboot the PC.
ffKUlUal.
59