Hp Lan Manager - Xircom POCKET ETHERNET ADAPTER III User Manual

4. To
start the workstation, load the drivers in the following order:
LSL
PE30DI
IPXODI
ODIPKT
FmaDRV
m T X
5. Change to the network drive (usually F:\LOGIN)
6.
Log in to the network.
HP LAN MANAGER (VERSIONS 1.X) NMS DRIVER
1. Install your HP LAN Manager workstation software according to
the instructions in your HP
LAN
Manager manuals, selecting a
3Com Ethernet network adapter. Before rebooting your system,
continue with these instructions.
2. Copy PE3NDIS.EXE (for DOS) or PE3NDIS.OS2 (for OS/2) from
the \NDIS directory on the Xircom Network Drivers diskette to
the drive and directory
you are using for your HP LAN
Manager
workstation files.
3. Using an ASCII t e x t editor, replace all references to the 3Com
Ethernet device driver in your CONFIG.SYS file with references to
the Xircom device driver. For example:
DEVICE=C:\LA"\PE3NDIS.EW
(or PE3NDIS.OS2)
4. Using an
ASCII text editor, edit the PROTOCOL.INI file as follows:
In the section
that
references the LAN adapters add the following
fragment:
;fircam Adapter
[XIRC(IMNET]
DRIVERNA%E=XIRm$
In the protocol bindings definition area of the PROTOC0L.INI
replace all references to the 3Com Ethernet adapter with:
BINDINGS=XIRCOMNET
41