Xircom POCKET ETHERNET ADAPTER III User Manual page 62

NetWm OD1
anl
Pocket
Dr'm#s
If you have a need to run Novell NetWare concurrently with the Xircom
packet driver, copy the file ODIPKT.COM from the \OD1 directory of the
Xircom Network Drivers diskette to the same directory to which you
copied the NetWare OD1 drivers. From the same directory, load the
drivers
in
the following order:
LSL
PE30DI
IPXODI
ODIPKT
N E m
NetWm
with the
N o d
SNA
Gateway
If you are running Novell NetWare and communicate to your host
computer through a Novell SNA Gateway, configure your Novell SNA
workstation software to print to a LAN printer. For additional information,
refer to your Novell documentation.
NetWm Reqrmter for
05/2
(vanions
2.x)
These instructions explain how to load the Xircom network driver as part
of the NetWare Requester installation process.
1.
Run the Netware Requester INSTALL program as instructed in the
NetWare Requester documentation and choose Requester on
workstation from the Installation menu.
2. After verifying your target directory and source drive for NetWare
Requester fdes, choose Edit CONFIG.SYS and Copy Files at the
Requester Installation dialog box.
3.
When prompted for the Network Interface
Card
driver,
type
in the
name of the Xircom driver: PE30DI.OS2. After completing the
other options in the dialog box, click on Save.
4.
When asked if the driver you specified is the one you want to
install,
choose Yes, then
type in
the path to the Xircom driver:
A:\ODI\PE30DI,OS2
51