Instollation Of Model Pe3-1 Obt; Instollation Of Model Pe3-1 O K - Xircom POCKET ETHERNET ADAPTER III User Manual

mustbeattachcdtonetwor%
at
the
end of
a
networjr
INSTAUATION OF M O D E L PE3-1 OBT
(TWISTED
PAIR)
1. Plug one end of the modular
data cable into the mating connector
on the Pocket Ethernet Adapter 1 1 1 , as shown in Figure 4.
2. Plug the other end
of the modular data cable into a network
access port (usually a wall connection).
Fi g ure
4.
AWi Twisted
Poi r Cobl i n g to Model p E 5 1 OBT
INSTANATION OF MOML PE3-1 OBC (COMBINATION)
Follow the installation instructions for Model PE3-10B2 if you are
connecting to a t h i n Ethernet network (see Figure
31,
or the
instructions for Model PEIlOBT for connection to a 1OBASE-T
network (see Figure
4).
10