Xircom POCKET ETHERNET ADAPTER III User Manual page 81

NMS DRMR PARAMETERS
See the alphabetical listing of network operating systems in the Softwarn
Setup and Installation section to determine whether your network uses
an NDIS driver.
PE3NDIS.EXE and PE3NDIS.OS2 are NDIS drivers that support the Pocket
Ethernet Adapter
I I I .
The PROTOCOL.INI file used with these drivers
must contain the module name and DRIVERNAME as follows:
[
XIRCOEDJET]
DRIVERNAME
= XIRCOMS
When the PE3NDIS command is executed, the Adapter will automatically
find and use an appropriate parallel port and interrupt value and select
bidirectional or non-bidirectional mode. Should it be necessary to
override the self-configured values,
use an
ASCII text editor to add the
appropriate combination of the parameters
listed
below to the
PROTOCOLINI file (keywords are not
case
sensitive):
KeJlword
DeEault valid-
"
AUTO
LpT=
AUTO
(1 to
3 )
m=
AUTO
( 3
t o 15)
IOADM(ESS= AUTO
(0x240 to
0x380)
LINKDISABLE LINK
m G R I T Y
KNABLED
70