Xircom POCKET ETHERNET ADAPTER III User Manual page 82

where
NON forces the driver to run
in
non-bidirectional mode. Without the
"NON"
keyword, the driver autoconfigures to bidirectional or non-
bidirectional mode.
LIT= requires a number from 1 to
3
which designates the physical
parallel port to which the Adapter
is
connected: LPT1, LPT2, or LpT3.
Default (if parameter not specified) is autocodguntion.
INT- requires a number designating the parallel port hardware interrupt
(for example, INT-5 or INT=7). Default (if parameter not specified)
is
autoconfiguration. Use 0 (zero) to force the Adapter into a polled mode.
IOADDRES= requires an VO address in hexadecimal notation (0x240 to
0x380). Default (if parameter not specified)
is
autoconfiguration.
LINKDISABLE
disables link integrity for operation with non-1OBASE-T
networks such as StarLAN 10. Without the "KD1SABI.E" keyword
in
the PROTOCOL.INI file, the driver defaults to link integrity ENABLED.
Instructions for loading the appropriate NDIS files and drivers are
provided
in
the Sofrware Setup
and Instalhtion section listing network
operating systems
in
alphabetical order by vendor.
W e t Ethernet
Adapter 111
User's
Gll;de 71