Microsoft Windows For Workgroups; Ncsa Telnet - Xircom POCKET ETHERNET ADAPTER III User Manual

M I C R O S O F T WINDOWS FOR WORKGROUPS (NMS DRIVER)
1.
Run the Windows for Workgroups "setup" program.
2. When prompted to select the available network adapter driver,
choose "Unlisted or Updated Network Adapter" at the bottom of
the screen.
3.
When prompted, i n s e r t the Xircom Network Drivers diskette.
4. Select "Xirmm Pocket Ethernet Adapter
III" from the menu.
5. Complete the Windows for Workgroups setup, inserting the
6.
Reboot the computer.
Xircom Network Drivers diskette as required.
N C R STARGROUP
See the heading "AT&T/NCR StarGROUP."
NCSA TEWET (PACKET DRIVER)
NCSA Telnet
is
a public domain Telnet implementation from the National
Center for Supercomputing Applications (NCSA).
It can
be used with
PE3PD.COM, Xircom's Packet Driver, which
can
be found in the
\PKTDRV directory on the Xircom Network Drivers diskette. After
installing the packet driver
in
accordance with your NCSA Telnet
documentation, assign the following options in the CONFIG.TEL file:
hardwareqacket
ioaddr=60
where 60
is
the default software interrupt for the Xircom Packet Driver.
NDIS DRIVER
The Xircom NDIS driver conforms to the Microsoft Network Driver
Interface Specification (NDIS). It
can
be found in the \NDIS directory on
the Xircom Network Drivers diskette. A sample PROTOCOL.IM segment
is
also included. For installation instructions,
see
the alphabetical listing
for your network operating system in t h i s
section.
See Appendix C,
Command Line
Parameten,
for more detailed information.
49