Ftp Software Lanwatch - Xircom POCKET ETHERNET ADAPTER III User Manual

FTP SOFTWARE LANWATCH (PACKEl AND NMS DRIVERS)
FIT Software's W a t c h network monitor software
(versions 2.01 or
later)
can
be installed using Xircom's packet or
NDIS
drivers. For
information on which driver
is
appropriate for your network environ-
ment, refer to the ETP W a t c h documentation.
FrPSoftwaelANWurdlPdetDr'nerlmtdktkn
1. Install W a t c h according to the
instructions in
your FI'P
W a t c h manual.
2. Copy the file PE3PD.COM from the \PKTDRV directory on the
Xircom Network Drivers diskette to the directory where your
W a t c h fdes are stored.
3. (This step not required for W a t c h versions 3.0 and later.)
Using an ASCII text editor, add the following line to your
CONFIG.!XS file:
DEVICE = [gath]IFCIJST.SYS
where M b l is the
drive and directory where your W a t c h files
are stored.
4. Reboot the PC.
5. Change to the
directoqr
where your W a t c h files are
stored
and
6.
Run LW.EXE.
run PE3PD.COM.
You may have to reboot your PC
after
running W a t c h to deactivate
promiscuous mode, which
is
needed to monitor all packets.