Xircom POCKET ETHERNET ADAPTER III User Manual page 68

For
OS/2:
DEVICE
=
[path]PE3NDIS.OS2
where [pthl is the drive and directory in which you installed your
network operating system.
7. Use an ASCII text editor to modify your PROTOC0L.N file as
follows:
For each protocol that you want to bind, set the protocol definition
area of the PR0TOCOL.INI file to:
BINDINGS
WLOOP
At
the end of the file, add the following fragments
[WLOOPI
DRIvERNAm
=
WLOOP$
BINDINGS =
XIRCOMNET
;XIRCOM
ADAPTER
[
XIRCOMNET]
DRIVERNAME =
XIRCOMS
8. Reboot the PC.
57