Ftp Software - Xircom POCKET ETHERNET ADAPTER III User Manual

FTP SOFTWARE
K/TB
(PACKET, NDIS, AND OD1 DRIVERS)
F l ' P Software's P W P Generic Ethernet Kernel ETHDRV.EXE
can
be
installed using Xircom's Packet,
ODI,
or
NDIS
drivers. For information on
which driver
is
appropriate for your network environment,
see
the Fl' P
P W C P documentation.
FTP
saftwae
K/T@
P d e t
D t h
lnstdktkn
I.
i n s t a l l P W C P software according to the directions given
in
the
PC/TCP documentation.
2. When the installation
is
complete, copy the file PE3PD.COM from
the \PKTDRV directory on the Xircom Network Drivers diskette to
the P C / T B directory specified in the PCflCP i n s t a l l procedures.
3.
(This
step
not required for P W C P versions 2.10 and later.) Using
an
ASCII text
editor, add the following lines to your CONFIGSYS
file:
DEVICE=
[path] IPCUST.
SYS
DEVICE= [path] IEUST.
SYS
where
4&1
is
the drive and directory specified at the P m C P
i n s t a l l a t i o n .
4. Reboot the PC.
5. Change to the directory where your
P m C P files are stored and
r u n
PE3PD.COM.
6.
Run the ETHDRVEXE kernel program supplied with P W C P . This
loads the PCflCP kernel into memory. The packet driver must
always load before the kernel.
7. Continue your server or workstation startup as instructed
in
the
P W C P documentation.
Pocket
Hhemet Adaprer
111
WS Guide
37