Novell Netware Lite - Xircom POCKET ETHERNET ADAPTER III User Manual

NOVEU N€lWARE UTE (VERSIONS 1 4 OD1 DRIVER
1.
I n s t a l l NetWare Lite according to the instructions in the NetWare
Lite manual.
2. When prompted for type of network adapter,
choose
"3Com
EtherLink II" and complete the installation.
3. Copy the files PE30DI.COM and NET.CFG from the \OD1
directory of your Xircom Network Drivers diskette to the
\ " E directory on your hard disk or boot diskette.
4. U s e an
ASCII text editor to replace the line
in
your
STARTNET.BAT file that reads
3C503
with
PE30DI
5. Save the file.
6.
Reboot the PC.
7. Change to the \ " E directory and type STARTNET to
start
the
network on that station.
0512
See
entries under "IBM OS/2."
OD1 D R M R
See the alphabetical listing of network operating systems for those that
can
use the OD1 driver. See Appendix C,
Command
Line Pariametem, for
more detailed information.
PACKET DRIVER
Xircom's packet driver is based on
FIT
Software's public domain
spedfication. The driver file PE3PD.COM is located in the \PKTDRV
directory of the Xircom Network Drivers diskette. To determine whether
you should use the packet driver, refer to the instructions for your
network operating system, listed alphabetically in t h i s section. See
Appendix C, Command Line Pariamers, for more detailed information.