Pocket Ethernet Adapter 111 Instollation; Instollation Of Model Pe3-1 Ob2 - Xircom POCKET ETHERNET ADAPTER III User Manual

POCKET mERNET ADAPTER 111 INSTAUATION
INSTAUATION OF MODEL PE3-1062 (THIN ETHERNm
1.
Attach the T connector (and
t h i n
Ethernet network cabling) to the
BNC connector on the Pocket Ethernet Adapter III as shown
in
Figure
3.
If the Adapter is located at the end
of a cable segment,
attach a
5 h h m
terminator to the open end of the T connector, as
shown in the Figure.
Fgure
3. Aiiuchii the Thin Ethemet
Cable to Model PE3-1082 (end
of network segment)
W e t wemet Adoper 111
User's Guide
9