Table of Contents
Advertisement
O r i e n t a t i o n i n u p - l i g h t i n s t a l l a t i o n s
Important! If installing the Alien 05 as an up-light, position the sphere so
that the motor vent is below the lens.
The motor vent is the vent closest to the lens
(see illustration on right).
The illustrations below show how to minimize heat stress on the color wheel
motor. Down-light installations (a) are straightforward. However, in up-light
installations (b and c), ensuring that the motor vent is below the lens, as in
(b), will optimize motor cooling.
If an Alien 05 Recessed or Eyeball has
been installed as in (c) above, it can be
adjusted to optimize motor cooling by
rotating the sphere through 180° (A) and
tilting (B) to re-aim the beam.
12
a
Configuring an Alien 05 system
b
B
c
A
Advertisement
Table of Contents
